Ford Racing Rear Diff Cover

[CSCOBRA03]

Who on here has installed the Ford Racing diff cover?

I plan on dropping the whole diff to properly clean and seal it. I will be using Motorcraft gray heavy duty silicone sealer. All my bearings are good as I rebuilt the rear diff a few years ago. I use my Cobra for several open track days a year so it does not just sit around.

Is there anything else I should be doing or any tips?

 

[P49Y-CY]

If you haven't already, install front and rear differential bushings. A lowering rear bushing optimizes driveline angles, but you'll probably have to modify the frpp cover.

 

[BLOWN9646]

Fill before re-installing back into the car

 

[Comp04svt]

And make sure you don't fill it up and over fill it or it'll spew fluid every where. Like mentioned above I would at the very least do the FTBR front and rear diff mounts with the Ford Racing cover they sell that's pre modified for the lowering bushings.