I recently had these powder coated and the vendor didn't do it to my standards. So my loss your gain. They do need a little work The PC'er put to much PC on the center hub and took the rubber o-rings off and tried to trim the center caps, therefore the center caps will need new o-rings but will work just fine. The center bore needs a slight hone. Nothing that I couldn't do I just decided to buy another set of Signature rims and go another direction. The rims have not been damaged and I just decided to go with another color and the vendor just did me wrong. Im asking 2K shipped. Specs SV108 Front 19x11 ET +22 Rear 19x11.5 ET +57 They will fit 2015 and up Tech and track pack and obviously the R. If your looking to lighten you rotational mass on the track then you should know this is a smoking deal on forged wheels. Please don't waste my time and try to lowball or negotiate. I dont need the money and they can sit until the right buyer comes along. Thanks If you'd like pics of them on a RR Shelby send me a PM.