FS - VMP stainless 2.4" pulley for TVS

fullboogie

Well-Known Member
Established Member
Joined
Dec 6, 2004
Messages
2,590
Location
Texas
I'm selling the VMP 2.4" stainless steel pulley from my 2013 TVS. I will say up front that at my power level (650 rwhp) I had belt slip with this pulley on occasion, and that's the reason I changed to a different pulley. Some people have had this issue, some people have not.

I'm selling it cheap because I was not happy with it. $50 OBO plus shipping, which should be pretty cheap. As you can see, it is in good condition with no scratches that I can see. There is a little belt dust on there, but that's it.

20130710_193323_zps2b5e3689.gif


20130710_193312_zps77d24f68.gif


20130710_193301_zpsf003a348.gif
 
Last edited:

08KR525

Member
Established Member
Joined
Jun 23, 2011
Messages
319
Location
Midwest
Is the bore of the pulley threaded? I've not seen that on a pressed on pulley before. What did you replace it with if you don't mind me asking? GLWS and bump.
 

fullboogie

Well-Known Member
Established Member
Joined
Dec 6, 2004
Messages
2,590
Location
Texas
It is not threaded - it has ribs to help with pulley retention on the shaft. It is still a press on pulley.
 

fullboogie

Well-Known Member
Established Member
Joined
Dec 6, 2004
Messages
2,590
Location
Texas
This thing is just going to sit in my garage attic - how about $10 for shipping and I'll give you the pulley for free. I'd say it's worth $10 to see if it works on your car. What do you have to lose?
 

Users who are viewing this thread



Top