Full Tilt Boogie IRS Upgrade Kits-Free Shipping & 0% Financing for 1 year!

TPSMak

Authorized Vendor
Authorized Vendor
Joined
Apr 12, 2005
Messages
3,766
Location
san jose, CA/ Norcal
Full Tilt Boogie IRS Upgrade Kits
-Free Shipping & 0% Financing for 1 year!
-All Car Care One Cards accepted!


386311-_1_.jpg


Are you tired of the sloppy and weak IRS Ford installed in your IRS equipped Mustang Cobra? Are you tired of the wheel hop caused by your IRS which eventually causes This kit will help turn your 99, 00(R), 03, 04 Cobra into a world class handling car! Don't accept ANY other option when it comes to IRS upgrades.. Full Tilt Boogie is hands down the best option!


Complete IRS Bushing Kit Includes:

Delrin Upper control arm bushings kit (FT1000)
-Includes 4 Delrin upper control arm bushings and 4 hardcoated inner sleeves. Replace the factory rubber UCA bushings with this kit to eliminate wheel hop. Grease grooves are machined in the bushings to help distribute the grease evenly.

Delrin Lower control arm bushings Kit (FT1100)
-Incluides 8 Delrin lower control arm bushings, 4 hardcoated inner sleeves and 12 stainless steel shimming washers Replace the factory rubber LCA bushings with this kit to eliminate wheel hop.

Aluminum Front diff supports (FT1200)
-Includes Aluminum shimming washers to set pinion angle. Stabilize the differential by removing the OEM front differential rubber bushings and replace them with this kit. Stabilizing the differential will prevent diff cover leakage and in high torque situations, diff cover and halfshaft breakage.

Delrin Rear Diff support (FT1300)
-Stabilize the differential by removing the OEM rear differential rubber bushing and replacing it with this kit. Stabilizing the differential will prevent diff cover leakage and in high torque situations, diff cover and halfshaft breakage.

UHMW IRS Subframe support set (FT1500)
-Stabilize the subframe by removing the OEM rubber bushings and replacing them with this kit. By stabilizing the subframe with this kit, handling will be more predictable and will also prevent wheel hop.

Grade 8 Front Subframe Bolts (FT1600)
-1 pair of Grade 8, 9/16" bolts with nylock nuts and flat washers for the front subframe mounts.

Combination UCA and LCA bushing grease fitting kit (FT1700)
-Helps keep the upper and lower control arm bushings well lubricated.

We HIGHLY recommend the FTB Bushing Install Kit to make installs easier!
 

Users who are viewing this thread



Top