Please send a e-mail to [email protected] as I cant keep up with multiple forums
Everything fits 99-04 Cobra
Everything is used unless noted
CPR Fuel Rails 150.00 ****** SOLD ********
72LB Fuel Injectors 500.00
Upper & Lower Torque Boxes 50.00
Lower Control Arms 130.00 * Brand New in Box
Rear End Girdle 80.00
UPR Read Coil Over Kit 230.00 * Brand New In Box
MM Panhard Bar 330.00 * Brand New in Box
MM Torque Arm 600.00 * Brand New in Box
SCT 4 Bank Chip 180.00
Polished Billet Mustang Knobs 20.00
Mustang Strut Tower Bar 70.00 * Brand New Missing Screws
BBK Throttle Body 280.00
Blitz SBC i-Color SPEC R Boost Controller 500.00
Turbo Smart Ultra Waste Gate 220.00
N2MB 2 Step WOT BOX 140.00
Brembo Front Brake Kit 1200.00
HPX Maf Sensor 150.00
Canton Racing Oil Pan 280.00
Glenn Performance Fuel Tank 350.00
Hellion Turbo Kit 3500.00 * Does not come with Turbo, but does include custom 4" downpipe, exhaust, blow thru conversion.
Precision T76 Billet Wheel Turbo 1150.00
Built Rear End with Girdle, Steel Splines, Upper and Lower control arms, sway bar for 1500.00
Also comes with Eibach Pro Kit Rear Springs, and Tokico 5 Way Adjustable Shocks...
Cobra Grille for Mustang 15.00
Pillar Pod (Triple Pillar) 30.00
Autometer C2 Boost Gauge 30.00
SCT XCal 2 150.00
Ported 99 Cobra Intake 700.00
Glenn Performance Fuel Pumps x2 150.00
Engine for Sale: 4500.00
3000 Miles on Motor
Specs:
Stage 3 Ported Heads
Comp Cams Stage 2 Cams with Custom Turbo Grind
Canton Racing 7qt Oil Pan
MMR 1150 Stroker
*Brand New Cast Iron 2004 Cobra Block, torque plate bored and honed
*New USA MADE FORGED 5.0 STROKER Crankshaft w/micro polished journals at no extra charge
*New 4340 MANLEY Forged H-beam Rods ( These US made rods are shotpeened, magnafluxed and weight matched to bring you the finest H-beam rod available for your 5.0 Stroker)
*New FORGED Manley or Diamond pistons Bore size (High or low compression)
* Total Seal file fit rings (precision file fit to your application, nitrous, blower, turbo or N/A)
* Clevite Tri-metal Rod and Main bearings
*Complete Pro Assembly and Balancing for the smoothest, highest revving shortblock available, Pre-Lubricated with Royal Purple Assembly Lube and spin tested. Lastly 3 technicians sign off on your new engine prior to packaging and crating.
Teflon Coated Piston Skirts now come standard on ALL MMR Stroker engines ($300 value)
Everything fits 99-04 Cobra
Everything is used unless noted
CPR Fuel Rails 150.00 ****** SOLD ********
72LB Fuel Injectors 500.00
Upper & Lower Torque Boxes 50.00
Lower Control Arms 130.00 * Brand New in Box
Rear End Girdle 80.00
UPR Read Coil Over Kit 230.00 * Brand New In Box
MM Panhard Bar 330.00 * Brand New in Box
MM Torque Arm 600.00 * Brand New in Box
SCT 4 Bank Chip 180.00
Polished Billet Mustang Knobs 20.00
Mustang Strut Tower Bar 70.00 * Brand New Missing Screws
BBK Throttle Body 280.00
Blitz SBC i-Color SPEC R Boost Controller 500.00
Turbo Smart Ultra Waste Gate 220.00
N2MB 2 Step WOT BOX 140.00
Brembo Front Brake Kit 1200.00
HPX Maf Sensor 150.00
Canton Racing Oil Pan 280.00
Glenn Performance Fuel Tank 350.00
Hellion Turbo Kit 3500.00 * Does not come with Turbo, but does include custom 4" downpipe, exhaust, blow thru conversion.
Precision T76 Billet Wheel Turbo 1150.00
Built Rear End with Girdle, Steel Splines, Upper and Lower control arms, sway bar for 1500.00
Also comes with Eibach Pro Kit Rear Springs, and Tokico 5 Way Adjustable Shocks...
Cobra Grille for Mustang 15.00
Pillar Pod (Triple Pillar) 30.00
Autometer C2 Boost Gauge 30.00
SCT XCal 2 150.00
Ported 99 Cobra Intake 700.00
Glenn Performance Fuel Pumps x2 150.00
Engine for Sale: 4500.00
3000 Miles on Motor
Specs:
Stage 3 Ported Heads
Comp Cams Stage 2 Cams with Custom Turbo Grind
Canton Racing 7qt Oil Pan
MMR 1150 Stroker
*Brand New Cast Iron 2004 Cobra Block, torque plate bored and honed
*New USA MADE FORGED 5.0 STROKER Crankshaft w/micro polished journals at no extra charge
*New 4340 MANLEY Forged H-beam Rods ( These US made rods are shotpeened, magnafluxed and weight matched to bring you the finest H-beam rod available for your 5.0 Stroker)
*New FORGED Manley or Diamond pistons Bore size (High or low compression)
* Total Seal file fit rings (precision file fit to your application, nitrous, blower, turbo or N/A)
* Clevite Tri-metal Rod and Main bearings
*Complete Pro Assembly and Balancing for the smoothest, highest revving shortblock available, Pre-Lubricated with Royal Purple Assembly Lube and spin tested. Lastly 3 technicians sign off on your new engine prior to packaging and crating.
Teflon Coated Piston Skirts now come standard on ALL MMR Stroker engines ($300 value)
Last edited:
