Ok guys, some of you may know im getting out of the mod motor game. These are the things I have acquired over the years. Some of this stuff ill let go for free if you pay shipping.
Just a brief run-down and ill add more as I think of it all
Ive got
There is more on my shelves but thats all I can think of at the moment
Like I said earlier- bolts and little stuff ill just let go for cheap or free (as long as you pay shipping)
I'd rather help someone out in a pinch, rather than just scrap everything from the get go.
Everything else will be cheap. Not looking to make a ton
Here's a picture of the IAC Setup
Just a brief run-down and ill add more as I think of it all
Ive got
- 2 4v Harmonic Dampners
- 2v/4v/ Chain Guides
- Complete set of 4v lifters/followers
- 2v IAC with -10 Male Welded on for Braided IAC Line (Really cleans it up and i have the SS line with a -10 90* and 45* fitting on it. All you would have to do is weld a bung on your piping. This worked flawlessley on my turbo 2v
- Various IAC Valves 2v 4.6/5.4 truck or car
- Low Low mileage timing chains and tensioners (sub 5k)
- 2v Exhaust Manifolds (used with a Gen 1 ON3 kit)
- 04 Cobra Exhaust Cams
- Tons and Tons of bolts
- ^ Have all different sets (WP, covers, intake etc)
- 2v 1 Bolt Timing Chain Cover (x2)
- 2v Alternator off a PI Car
- 4v secondary Chains/Tensioners/Gears
- 2v/4v Crank Trigger Wheels
- Cobra Crank that could use a polish (make offer)
- Fresh machined 6 bolt GT CAST Crank .10/.10 Also have brand new main/rod bearing to go with it. King Brand*
- 8 Bolt CAST Crank(ready to rock**)
4v Cobra pick-up tube
Crank Sensors and Cam Sensors (x5 of each)
Low Mileage 2v Oil Pump OEM Ford
2v Water Pump w/ pulley 28k miles
Rear Main Seal Cover
Driver Side Motor Mount- Excellent Shape
1999 Cobra Fuel Rails (OEM) with FRPS and 24# Injectors
1999 Cobra Shortblock with 34k on it (Make Offer)
I will help with shipping^
There is more on my shelves but thats all I can think of at the moment
Like I said earlier- bolts and little stuff ill just let go for cheap or free (as long as you pay shipping)
I'd rather help someone out in a pinch, rather than just scrap everything from the get go.
Everything else will be cheap. Not looking to make a ton
Here's a picture of the IAC Setup
Last edited: