Grease for BMR poly bushings?

[BMR Tech 2]

I'm not sure what grease was used during install. Is it a bad idea to try to push it out with something I know is good? Maybe just a few pumps here and there to start the process? Or would mixing be a bad idea?
I've had everything on for about 15k miles now.

Mixing is fine, but overgreasing is not. If the bushings haven't been greased since installation, do 2 pumps. I would not overdo it or you may damage the bushings. If you're really concerned about it, then it may be a good idea to remove the bushings and clean all the old grease out.

 

[noldevin]

Mixing is fine, but overgreasing is not. If the bushings haven't been greased since installation, do 2 pumps. I would not overdo it or you may damage the bushings. If you're really concerned about it, then it may be a good idea to remove the bushings and clean all the old grease out.

Awesome I'll grab some Super Lube or Amsoil and give it a couple pumps. Thanks!