Help Identifying Some Connectors

[MrWillyWonka11]

Can we help identify some connectors on my 1997 Mustang Cobra? The car has an O/R H Pipe and the o2 sensors were tuned out. I think a few of these are for the o2 sensors but not 100% sure.


First one is located near the passenger side headlight.

these two are located in the passenger side fender well

third one is a plastic line near the abs module. Picture taken from the bottom of the car. I believe this is coming from the EVAP canister but I can't locate in the engine bay where it is supposed to go. The EVAP purge is fully connected. Any help is greatly appreciated.

Thank you!

 

[2DXTRM]

The above link is an ECM pinout for a 96 Mustang, but should be same for 97.

None of those in pic1 and 2 have anything to do with the O2 sensors.
not sure what the 2 wire plug in pic 1 is, but the two connectors in the second picture are for the smog/air pump.

The EVAP/charcoal box should be in the passenger fenderwell, behind the wheel liner, close to the firewall area.

 

[hotcobra03]

Passenger well plugs.
Air injection reaction bypass ?

2 pin connector c156 I come up with.
Black/yellow wire is hot at all times

White /orange.

Blue plug.
Air injection reaction relay

 

[I_like_turtlez]

The second photo is to the smog pump, Ford pulled a fast one hiding that stuff under the well.. like we weren't going to remove the cats anyway *laughs hysterically*