Help...in the middle of rear spring swap

[SKMCOBRA]

I searched real quick but didn't find it. What's the best place to remove the rear exhaust? It appears that the tail pipes have to come off to lower the IRS all the way down. Thanks!

 

[phil a]

Not sure about stock exhaust - if that’s what you have - but I can take tail pipes out by loosening a few clamps. I’ll mark each pipe with a sharpie in relation to the mid pipe to make it easier to line back up. Kind of a pain with those hangers but you’ll get it done.

 

[01yellercobra]

Above the tips is a hanger held in by 2 bolts. Remove the bolts and the exhaust should drop enough with the IRS to get the springs in and out.