• Welcome to SVTPerformance!
ATTENTION!
You may experience intermittent issues while accessing the site over the next 60-90 minutes, as we perform maintenance and upgrades.

How To: Program 99-04 Mustang Remotes

Discussion in 'How-To' started by SaleenFiend, Apr 18, 2009.

Thread Status:
Not open for further replies.
  1. SaleenFiend

    SaleenFiend 04 MC Cobra Established Member

    Messages:
    2,213
    Joined:
    Aug 12, 2004
    Location:
    Louisiana
    Figured I would let you guys in on the Remote programming trick that most dealers charge you at least a 1/2 ($40-$50) Labor rate for.

    I do have info on other FORD, LINCOLN, and MERCURY remote programming. So if you need to program a remote I can help you. PM me.

    Your remote must look like this:
    remote1.jpg
    or
    remote.jpg

    YOU WILL NEED ALL REMOTES TO VEHICLE WITH YOU TO PROGRAM ALL AT THE SAME TIME!!! MAKE SURE ALL THE BATTERIES ARE GOOD


    If you program 1 remote by itself, the others will not work until you do them together!

    *KOEO - Key On Engine OFF
    *KOER - Key On Engine Running

    Steps
    Put the key into the ignition and turn ON - Accessories are on (KOEO)
    Then turn Key OFF (DO NOT GO TO LOCK POSITION)

    Do this ATLEAST 8 TIMES in 10 SECONDS
    (key on, key off, key on, key off)

    After the 8th time the key is turned ON the door locks will LOCK

    LEAVE THE KEY ON

    THEN PUSH THE LOCK OR UNLOCK BUTTON ON EACH REMOTE AT this time ONE BY ONE.

    Once You have pushed each remote button
    Turn the key OFF

    The Doors WILL UNLOCK!

    VOILA!

    Test all your remotes!




    If you can't get it to work the first or 2nd time you try its ok. IF it NEVER WORKS then you may need another way to program it or have an issue.
     
  2. 006

    006 Slow mustang :( Established Member

    Messages:
    3,949
    Joined:
    Sep 18, 2002
    Location:
    Los Angeles
    Nice!
     
Thread Status:
Not open for further replies.

Share This Page