• Welcome to SVTPerformance!

How to remove these stainless side scoop inserts

Discussion in 'Interior and Exterior Body & Chassis' started by Mit5005, Jan 26, 2016.

  1. Mit5005

    Mit5005 Member Established Member

    Messages:
    64
    Joined:
    May 22, 2007
    Location:
    Tampa, FL
    These were on the car when I got it. Are they just mounted with adhesive?

    Z3X3hx7.jpg

    Would a heat gun be sufficient?

    Thanks in advance
     
  2. 4601S/C

    4601S/C Member Established Member

    Messages:
    579
    Joined:
    May 19, 2012
    Location:
    MO
    The factory ones are held in by tabs. a screwdriver and towel to protect the body is all I used, but again mine were factory. Can you see behind the metal at all? I would bet it's being held on with adhesive, but if you're lucky they may have stuck it to the factory inserts.
     
  3. Mit5005

    Mit5005 Member Established Member

    Messages:
    64
    Joined:
    May 22, 2007
    Location:
    Tampa, FL
    That worked, thanks! And of course the idiots who worked on this car used silicone to glue them to the inserts.

     

Share This Page