Installing a return system and have a few ?????

[krhonn]

So i finally decided to start on installing my return fuel system. I came across a few questions while installing that I hope someone can help me with.
First a few things about the car. It's a 14 and has the boss manifold.

So I see a "fuel line" going to the front drivers side of the manifold right behind the throttle body. What do I do with this line?
Also if you follow this line back towards the firewall it has a electrical connection. If I take this line off won't i throw a code with the connection not connected?
I guess the piece I'm referring to is called a purge valve.

Thanks everyone!

 

[JeremyH]

What kit? There is no "fuel" line going to the manifold, your likely looking a the evap purge line that sends fuel vapors from the tank into the manifold to be burned for emmissions. To answer your question is a seperate system than fuel supply for the rails/injectors and doesn't need to be touched. yes if you disconnected or removed it, it will throw codes.

 

[krhonn]

JeremyH, yes you are correct it is the evap purge line. I wasn't for sure if this had to come off while installing a return style system.

I was sent this link when I asked this question elsewhere.
https://lmr.com/item/M9424M50BR-HDW/2011-12-Mustang-Boss-302-Intake-Installation-Kit