• Welcome to SVTPerformance!

Intake

Discussion in 'SN-95 and New Edge Mustangs' started by Irish jake, Jan 24, 2019.

  1. Irish jake

    Irish jake New Member

    Messages:
    3
    Joined:
    Jan 20, 2019
    Location:
    milan indiana
    Who makes a really good aftermarket intake for a late 01 to 04 mustang gt with the 4.6 2v and not a cold air intake

    Sent from my SM-S727VL using the svtperformance.com mobile app
     
  2. DSG2003Mach1

    DSG2003Mach1 Well-Known Member Premium Member Established Member

    Messages:
    7,951
    Joined:
    Apr 15, 2004
    Location:
    Central Fl
    so are you looking for an aftermarket intake manifold?

    Whats your setup/goals?
     
  3. Irish jake

    Irish jake New Member

    Messages:
    3
    Joined:
    Jan 20, 2019
    Location:
    milan indiana
    I bought mild launitti cams cold air intake longtube headers bbk trottlebody and plenum one piece underdrive pulleys nothing to major just need some thing to make it breath better

    Sent from my SM-S727VL using the svtperformance.com mobile app
     
  4. Irish jake

    Irish jake New Member

    Messages:
    3
    Joined:
    Jan 20, 2019
    Location:
    milan indiana
    Just a weekend warrior project

    Sent from my SM-S727VL using the svtperformance.com mobile app
     
  5. jaxbusa

    jaxbusa Active Member Established Member

    Messages:
    361
    Joined:
    Sep 29, 2015
    Location:
    Northeast Florida
    If I were you I’d save for heads or blower. I wouldn’t think that an intake would be worth it on stock heads.


    Sent from my iPhone using svtperformance.com
     
  6. WhiteFaleen2001

    WhiteFaleen2001 Active Member Established Member

    Messages:
    1,106
    Joined:
    Jul 4, 2006
    Location:
    California
    Agreed, I would get other things first. However, once you have more of a built car, you could look at the TrickFlow 2v Street Burner intake manifold.
     
  7. Revvv

    Revvv Infinity Poster Established Member

    Messages:
    7,430
    Joined:
    Dec 8, 2017
    Location:
    GA
    I personally like this intake, but you will no longer be able to use your BBK plenum. The plenum is built into the intake in the same fashion as the Bullitt intake.

    The Edelbrock Vic Jr is another great part, but you will lose low end torque, and you must use Edelbrock fuel rails if I remember correctly.

    There are several more intakes available, but until you make a serious change the oem intake will do everything you need in regard to air flow.

    Sent from my [trashcan S5] using the svtperformance.com mobile app
     

Share This Page