IRS Cradle Has Bushing Shells Already Removed - Go MM or Full Tilt Bushings?

Stock Motor

Member
Established Member
Joined
Jan 11, 2006
Messages
200
Location
USA
Guys my IRS cradle previously had the bushing shells removed...MM bushings require those factory shells. I see that Full Tilt offers delrin cradle bushings for guys that have been silly enough to remove the bushing shells. I was really wanting to use all MM stuff, but now I'm looking at sourcing some replacement bushings with shells and pressing those in, then burning out the rubber, in order to use the MM urethane bushings.
 

P49Y-CY

fomocomofo
Established Member
Joined
Jun 21, 2003
Messages
11,217
Location
southwest
in my experience, ftbr makes an excellent product.

at least they did when i was putting them on my car over 10 years ago
 

P49Y-CY

fomocomofo
Established Member
Joined
Jun 21, 2003
Messages
11,217
Location
southwest
You have their cradle bushings?

oh yeah - all cradle/subframe, front/rear diff, upper/lower control arms. shitton of miles on them on both my cars without any issues. at the time i thought they were better engineered than the mm.
 

Users who are viewing this thread



Top