Is it worth upgrading Sync 2 to 3?

[01yellercobra]

So it's looks like the APIM is what's causing my issue with the seats. Since I have to get in there would it be worth upgrading to Sync 3? I've only dealt with it a couple of times in my grandma's MKX and it doesn't seem bad. But I haven't dealt with it on a daily basis.

I'd probably get something like this:

F250 | F350 | F450 (13-16') SYNC 3 Upgrade for MyFord Touch

In stock Ford F250|F350|F450 SYNC 3 Touchscreen Upgrade, Free Same Day Shipping, 30 Day Returns, One Year Warranty

www.4dtech.com

 

[96dreamer]

I just finished updating my truck to Sync 3 about a month ago. With the newest update it is worth the upgrade in my opinion, for what I have in it at least. It is faster, less buggy and a better user interface than 2. The biggest reason I did it though is for the Android Auto which I'm using a wireless dongle for, which so far has been flawless. I did it all myself for under $500

 

[01yellercobra]

I just finished updating my truck to Sync 3 about a month ago. With the newest update it is worth the upgrade in my opinion, for what I have in it at least. It is faster, less buggy and a better user interface than 2. The biggest reason I did it though is for the Android Auto which I'm using a wireless dongle for, which so far has been flawless. I did it all myself for under $500

I'm assuming you already had the 8" screen and sourced the module from somewhere? I have the screen already and I also have FORScan so I can program it as needed.

 

[96dreamer]

I'm assuming you already had the 8" screen and sourced the module from somewhere? I have the screen already and I also have FORScan so I can program it as needed.

I already had the 8" screen. Unfortunately the screen is different between the two also so you'll need that. I got the screen and Apim with nav on ebay for ~$300, It was out of an escape so it had the standard screen requiring me to modify the mounts.

Other things youll need are
HC3Z-10E893-C - Aerial Assembly GPS antenna (2017 F2/350)
GL3Z-10E928-AA - Splitter Nav XM Splitter (2017 F150)
HC3Z-19A387-B - Module Interface (USB) (2017 F2/350)
GC3Z 19C149-A - Bezel (USB Trim) (Fusion)
USB hub adapter Amazon link

 

[01yellercobra]

How hard was it to change the satellite antenna?

 

[96dreamer]

Not bad. I have a sunroof which made it a little tougher. Pull the a pillar trim and visor screws and pull it down just enough to get to the factory bolt. New one plugged right in and used the same mounting hole. It was a little smaller so I did a quick compound on the paint to buff the old marks off.

 

[96dreamer]

I got most of my info from here, DIY OEM Sync 2 to Sync 3 Conversion (Bunch of photos) - Ford Truck Enthusiasts Forums

Downloaded the latest sync 3 information here, CyanLabs - Ford Guides, Syn3 Updater And Much More!

And got the as built data from a similar optioned 17+ truck here, https://www.motorcraftservice.com/AsBuilt. I just searched for one for sale with the same options as mine and copied the vin from the ad.

 

[BlksvtCobra01]

I did it in my 2015 F150 no regrets I didn’t get nav because I didn’t have it and I use waze. But I have the latest update and it’s great for the apple car play. I bought the whole kit off a guy in f150forums great reputation watsontech of something he gives you I think a 30 day warranty it was plug and play and I didn’t have to change the XM antenna just the gps which was included in his kit too all plug and play.


Sent from my iPhone using Tapatalk

 

[offroadkarter]

Jump to sync 3.4, Sync 3 is a big upgrade over sync 2. 100% worth the upgrade.

 

[01yellercobra]

I went ahead and ordered the kit from Watson Tech. I know I could have done it cheaper searching things out, but I just wanted to get everything together so when it shows up I can jump in. I did get the Nav as I already have it and want to keep the option. Especially if I do end up selling the truck.

Which is looking more and more like I never sell it.

 

[BlksvtCobra01]

I went ahead and ordered the kit from Watson Tech. I know I could have done it cheaper searching things out, but I just wanted to get everything together so when it shows up I can jump in. I did get the Nav as I already have it and want to keep the option. Especially if I do end up selling the truck.

Which is looking more and more like I never sell it.

He is a great seller. To me it was easier than piecing everything together all plug and play I love it.

Nylon Pry Bar Installer Kit, 4 Piece

Amazing deals on this at Harbor Freight. Quality tools & low prices.

www.harborfreight.com

I recommend this kit too if you don’t have these tools.


Sent from my iPhone using Tapatalk

 

[Deceptive]

I went ahead and ordered the kit from Watson Tech. I know I could have done it cheaper searching things out, but I just wanted to get everything together so when it shows up I can jump in. I did get the Nav as I already have it and want to keep the option. Especially if I do end up selling the truck.

Which is looking more and more like I never sell it.

Let us know how it goes.


Does two women scissoring sound like an armpit farting contest?

 

[01yellercobra]

He is a great seller. To me it was easier than piecing everything together all plug and play I love it.

Nylon Pry Bar Installer Kit, 4 Piece

Amazing deals on this at Harbor Freight. Quality tools & low prices.

www.harborfreight.com

I recommend this kit too if you don’t have these tools.


Sent from my iPhone using Tapatalk

My buddy has them. And I'll be bugging him to come help.

 

[BlksvtCobra01]

My buddy has them. And I'll be bugging him to come help.

It isn’t bad I didn’t think it was.


Sent from my iPhone using Tapatalk

 

[01yellercobra]

It isn’t bad I didn’t think it was.


Sent from my iPhone using Tapatalk

All the write ups I've found seemed to have taken the person 1-1.5 hours to complete. I don't think that's bad at all.

 

[BlksvtCobra01]

All the write ups I've found seemed to have taken the person 1-1.5 hours to complete. I don't think that's bad at all.

That’s about the right time and what it took me.


Sent from my iPhone using Tapatalk

 

[96dreamer]

That's what mine would have taken if I wasn't a moron. Fyi the heated/ cooled seats didn't work without the truck running before the conversion so don't expect them to after ‍

 

[01yellercobra]

I'm just hoping they work like they're supposed to after this. Not that I'll mind the upgrade either way. I missed my cooled seats when I was in Az last month.

 

[01yellercobra]

The stuff finally showed up this week. The install was ridiculously easy. I didn't have to change the satellite antenna. The only addition was the GPS antenna under the dash. But it was literally remove the old module and hook up the new one.

My seats still don't work. So I'll need to dig deeper. But I had planned on doing this upgrade anyway so I'm happy with it.