JPC Turbo Boss #3 Build

[Aaron@JPCRacing]

Just wanted to show you guys a build we have going on here a the shop.

Boss 302 getting -

JPC Turbo Kit w/ 76mm Precision Turbo
Magnum XL Transmission
BMR Suspension
Mcleod Clutch and Flywheel
TSS Oil Pump Gears
JPC 1400hp Fuel System
FIC 1000 Injectors
Weld RTS Wheels
and more!



Rear end dropped out of it to get welded and suspension installed



Cleaning the rear off to get welded up



MT82 being taken out to make way for the Magnum XL Transmission and Mcleod Clutch and Flywheel!



New suspension installed. We put on BMR upper and lower control arms, BMR springs and a set of Viking double adjustable shocks.



Magnum XL Transmission hanging in place

Keep posted as we get this build going! I'll try to keep it updated with pictures and information!

 

[thehueypilot]

Interesting. Why not put a 9" rear end in and get rid of the c-clip axles? Putting the signature Boss quad exhaust back on? Please keep posting your progress.

Tim

 

[gimmie11s]

fantastic. love the boss's that come out of this shop.

 

[Aaron@JPCRacing]

Interesting. Why not put a 9" rear end in and get rid of the c-clip axles? Putting the signature Boss quad exhaust back on? Please keep posting your progress.

Tim

Every build has it's budget. This car will just be a street car so we weren't too concerned with the rear.

We will be retaining the Boss quad tips!

 

[Aaron@JPCRacing]

Front suspension is down!



Longtubes are off and the Hooker Blackheart series shortie headers are on!



Also just finished getting the drain welded into the pan!

 

[Aaron@JPCRacing]

Oil pump gears just got installed -


Getting the hot pipes mounted up









Fuel system getting installed

 

[ford20]

There is a part of me that almost regrets not going down this route. This looks like it is going to be a fun build for the owner! Some Kooks side pipes would be a nice little touch if he can dig through the cracks in his sofa and find a few extra pennies haha.

 

[Dizzyscure1]

Looks awesome, Hes gonna have a blast with it that's for sure. DON'T be stingy with pics! Post em!

 

[MeanGreenBoss]

Awesome build! Enjoying the pics!

I've been eyeing those Hooker Blackheart shorty headers with their 1 7/8" primaries for my Boss. Do you happen to have any dyno results on those Hooker shorties vs. stock manifolds? If they pick up 10-15 rwhp with a Red Key tune I'd probably buy a pair.

 

[BMR Tech]

DANG!

JPC doing all the things!

Keeping an eye on this one.

 

[jwlast]

Just a craniums up from my turbo car.......slightly loose v band on an up pipe trashed my plastic coil covers. Was kind of concerned with all that heat next to the covers to start with, had noticed some slight discoloration on both sides prior to the left front clamp becoming slightly loose. Went with a set of Ford Racing black powder coated aluminum coil covers after and heat shields from Hellion (not shown in pic). Hopefully no more serious under hood heat issues.

If I had it to do over again I would have started with these on the build....

 

[Aaron@JPCRacing]

Our turbo kit doesn't have any piping going by the valve covers. So that's not an issue on our kit!

 

[jwlast]

Awesome! That was my only concern with the turbo kit. That will be a sweet ride when its done.....

 

[Aaron@JPCRacing]

Just got the intercooler mounted up and cold piping done!



Finishing up the exhaust



Cut out is installed!

 

[MeanGreenBoss]

It looks like the exhaust was revised compared to the earlier photos? What happened to the Hooker Blackheart shorties?

 

[Aaron@JPCRacing]

Our turbo system mates to a factory style manifold. So the Hooker blackheart shorties bolt right up to our piping

 

[grabberblue]

How much do you all charge to install the OPGs?

 

[Aaron@JPCRacing]

How much do you all charge to install the OPGs?

This depends on a few factors. Shoot me a PM and I'll get you some pricing.

 

[Aaron@JPCRacing]

Here's a dyno video from the car!

[youtube_browser]U8V-FuTB2zQ[/youtube_browser]

 

[Aaron@JPCRacing]

On the dyno -


Final Product!!!