LFP pulley's?? problem

Gun5

New Member
Established Member
Joined
Aug 27, 2008
Messages
104
Location
Waco
Well I got 4 new pulley's (2 100mms -top/bottom- 2 90's -middles- and a 3.2 alt pulley) and a gator belt from LFP the other day anyways after driving it for alittle bit I looked and notice that 1 or 2 of the 90mm's are rubbing the mounting bracket/block

anyone had this problem? be calling LFP monday for some new pulley's and a belt since it rubbed on the side
 

Gun5

New Member
Established Member
Joined
Aug 27, 2008
Messages
104
Location
Waco
dont have any pics yet but no I did not install backwards if you put these ones on backwards the bolts/washers hit the snap ring letting them not spin
 

bigmoose

Well-Known Member
Established Member
Joined
Sep 18, 2007
Messages
2,257
Location
Kingston, RI
just return them for a refund. i bought a set from them and they are junk. the pulleys were all machined too big for the bearing causing them to wobble. they probably used a ruler to measure them.

good luck dealing with LFP, they are the worst vendor i've ever dealt with.
 

Gun5

New Member
Established Member
Joined
Aug 27, 2008
Messages
104
Location
Waco
well i bought it with a credit card so... im covered there

and I put a tensioner on today and nothing.. I think where my issue is they sold me to long of a belt

not sure
 

Gun5

New Member
Established Member
Joined
Aug 27, 2008
Messages
104
Location
Waco
Well I changed some stuff around and after looking at it I noticed my crank pulley is a tad forward of all the other pulleys? any idea what this means (besides it maybe not being seated right)
 

Users who are viewing this thread



Top