• Welcome to SVTPerformance!

Lower crank pulley???

Discussion in 'The Blower Bistro' started by termcobra281, Nov 19, 2018.

  1. termcobra281

    termcobra281 Member Established Member

    Messages:
    191
    Joined:
    Aug 16, 2016
    Location:
    wv
    Anyone ever seen a crank pulley that looks like this? I know it's not stock... it also has allen head/ star head bolts around the crank, also the center bolt is right hand turn to loosen correct? And would the bolts going around the crank be right to loosen or the normal left to loosen?? Thanks for any help... 20181119_222652.jpg 20181119_222744.jpg
     
  2. termcobra281

    termcobra281 Member Established Member

    Messages:
    191
    Joined:
    Aug 16, 2016
    Location:
    wv
    Well update on the pulley, I got the center nut off by cranking the engine and laying the breaker bar on a piece of frame... also have one allen head off out of 3, two left broke the tool trying to twist those off also.... what a plenty and btw all these was a normal thread pattern left to loose and right to tight..
     
  3. termcobra281

    termcobra281 Member Established Member

    Messages:
    191
    Joined:
    Aug 16, 2016
    Location:
    wv
    Not plenty but pity
     
  4. slo984now

    slo984now AKA 01yellerCobra Established Member

    Messages:
    13,486
    Joined:
    Oct 5, 2005
    Location:
    San Diego
    That's a stock 03/04 crank pulley. The stock caged pulley threads into those threads. I'm guessing you have an aftermarket lower crank pulley.
     

Share This Page