• Welcome to SVTPerformance!

lower pulley

Discussion in 'Engine/Tuning' started by SVTGT, Jul 25, 2008.

  1. SVTGT

    SVTGT Member Established Member

    Messages:
    107
    Joined:
    Aug 11, 2007
    Location:
    ERIE Pa.
    has anyone one else had alot of trouble with removing the lower pulley. and before anyone says it yes i know its left hand thread. and torque spec is 74 ft-lb and im putting way more than that into with no results.
     
  2. unit213

    unit213 Bone Stock Established Member

    Messages:
    4,362
    Joined:
    Mar 29, 2003
    Location:
    earth
    Let me put it to you like this...I'm 6'7 240+lbs and I've been weight training for
    about 18 years. I pulled so hard that I broke several breaker bars. I ended up using
    a ratchet with a 4 foot extension on it. I pulled so hard I thought I snapped the
    snout off the crank.

    Do a search, there are quite a few threads on this. I recently did a lower pulley install
    and I used some posts here as a guide.
     
  3. SVTGT

    SVTGT Member Established Member

    Messages:
    107
    Joined:
    Aug 11, 2007
    Location:
    ERIE Pa.
    i did finally get it off. i took my very large Matco ratchet and a 3 foot cheater bar, and when it went i though something broke.
     

Share This Page