Make your own bracket for installing a Meziere pump.

Status
Not open for further replies.

chrisheltra

Active Member
Established Member
Joined
Jan 22, 2007
Messages
7,745
Location
Goose Creek, SC
This will place the pump in a location where you can use the stock lines and hardware to mount the meziere pump.

I have made a bracket to install a Meziere I/C pump in the stock location. A drawing with dimensions is below. You will have to remove the stock pump bracket in order to install the new bracket. The new bracket should be made from 3/8 aluminum or steel. It will install with the two screws that were removed to take the stock bracket out.


bracket4.jpg

This was the pump that was used.

Meziere Enterprises WP136S - Meziere Remote Electric Water Pumps - Overview - SummitRacing.com

These are the fittings you will need to make the pump work with the existing coolant lines.

You will need one of these Search Results for MEZ-WP136S - SummitRacing.com

and two of these Search Results for MEZ-WP12034B - SummitRacing.com

Its the cheapest place I could find it and with free shipping.

Final resting place.
DSC_1058.jpg
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread



Top