Mid 10's Full Weight On 20's and 93 Pump Gas

ALLKHEINZ

Well-Known Member
Established Member
Joined
Nov 16, 2009
Messages
1,921
Location
Ontario Canada
Took the 15 to the track today to try out the new setup and was very very happy with the results...this was on half tank of 93 Pump Gas, Full Weight on 20's with a M/T Drag Radial and the spare removed from the trunk..

51C4798B-6775-472D-BC76-FB4555A3B608_zpshlj1oxza.jpg

1B133179-65F1-4F4C-B25D-2A2F2D2CC025_zpsnqbtr2yn.jpg

[youtube_browser]lp375trssXY[/youtube_browser]
 

ALLKHEINZ

Well-Known Member
Established Member
Joined
Nov 16, 2009
Messages
1,921
Location
Ontario Canada
Beefcake Package

Vortech Non Billet JT Trim
8 Rib Upgrade
ID 1000
JMS BAP
Stainless Power Headers
Corsa Sport Axelback
Viking Street Double Adjustable Rear Shocks
Circle D 3C Converter
M/T 305/35/20 DR SS Tire
Billet Oil Pump and Crank Gears
315 Gears
 

ALLKHEINZ

Well-Known Member
Established Member
Joined
Nov 16, 2009
Messages
1,921
Location
Ontario Canada
^^^it woulda been a great race he had been running 10.5 and 10.6 all day at 135mph...he actually didnt butn me down he was backed out by the starter who noticed some fluid from the car that had just made a pass in that lane...i wound up doing a solo run..vette ended up runnin a 10.80 when they let him go adter checking his lane.
 

ALLKHEINZ

Well-Known Member
Established Member
Joined
Nov 16, 2009
Messages
1,921
Location
Ontario Canada
3.6" pulley 16 degrees timing, 93 Pump Gas, depends on rpm as there was a few different pulls...it made 602/450 at around 11.5psi at around 7k and when pulled to 7500 it made 650/480 and i beleive saw 12.5psi...i have room to grow if i wanna run some unleades race gas and turn it up a bit but its a stock motor so im keeping it right where its at...its a very happy street/strip car...id say well over 4k lbs as raced with me in it...
 

burnin4

Car Junkie
Established Member
Joined
Jan 28, 2006
Messages
2,279
Location
everywhere
bada$$ man, congrats! Mid 10's in the mid 130's is dirty for pump gas setup. Cant wait to run my Lund tuned TVS, hoping for similar numbers.
 

ALLKHEINZ

Well-Known Member
Established Member
Joined
Nov 16, 2009
Messages
1,921
Location
Ontario Canada
Do you have a picture of the motor I'd like to see how it looks.

best one i have is the first one in this thread with the fan on it....in all honesty it looks pretty subtle, but ill take a couple pics when i have it out again over the weekend.
 

GotHemi?

Hell Kitty Nut Swinger
Established Member
Joined
Dec 13, 2010
Messages
3,244
Location
New Orleans
Any videos? Id love to hear how the corsa sounds. Also if you dont mind. How much for that entire setup? Parts wise, no labor.
 

Users who are viewing this thread



Top