Misc parts for sale..... Killer chiller/ MMR/ AEM wideband/ T56 bell housing & more

SVT_Troy

Well-Known Member
Established Member
Joined
Jun 23, 2011
Messages
5,324
Location
Virginia
- 12 6 oz cans of Enviro-Safe Industrial R134a Replacement Refrigerant. $65 plus shipping

- New pilot bearing $7

- Duda energy 1" T valve 2x 1” to 3/4” with brass adapters and 2x 3/4” brass fittings. This is used to switch between a Killer Chiller and H/E if you want to be able to isolate each other. $25
(** Pro tip…. You use a 1” valve to reduce the restriction at the ball
valve, use a 3/4” valve and the ball in the valve is less than 1/2”!)


- Maximum motorsports coil-over spring clearance tool $4

- Pre-cut bumper insert and the large worm clamps $30
(Local sale/ no shipping)

- Black anodized MMR Coolant filler neck with Stant cap (new never installed) $SOLD

- AEM failsafe wideband P/N: 30-4900
includes used sensor and brand new never installed sensor. Comes with all pieces as it did when new. $SOLD

- T56 bell housing $Sold

- Gen 3 Killer chiller- I My lines were crimped correctly and never experienced any refrigerant leaking whatsoever. included is a new upgraded blue F150 orfice tube. Only thing I would recommend is buying new O-rings for the lines. Can be bought from Autozone, advanced auto, etc. $SOLD


48816259463_4165f0d878_k.jpg
IMG_0501


48816722561_1d0d6f37dc_k.jpg
IMG_9732

48816364918_7879d41a93_k.jpg
IMG_0191

48816617091_26c2b463ce_k.jpg
IMG_0502

48816259223_cb0cfd43b4_k.jpg
IMG_0503

48816617316_7a5b86cfac_k.jpg
IMG_0500

48816616871_1416ff0786_k.jpg
IMG_0485

48816880077_55034cc684_k.jpg
IMG_9729

48816722691_2b984df3d8_k.jpg
IMG_9730
 
Last edited:

SVT_Troy

Well-Known Member
Established Member
Joined
Jun 23, 2011
Messages
5,324
Location
Virginia
MMR coolant filler neck, bell housing and wideband sold!

Make an offer on anything!
 

Users who are viewing this thread



Top