MSD 2step help

[03 Cobra DSG]

Anyone instal one of these on their cobra? Seems impossible to get the coil cover to seal properly. I can get it screwed on but it’s definitely not sealed all the way. Other than that seems pretty easy I’m just going to hook it up to the transbrake button for the 6r80 and see how it goes...and of course the 3.4 crusher is always in the dam way lol

Sent from my iPhone using the svtperformance.com mobile app

 

[01yellercobra]

As long as it's holding the COPs down you're fine. Its not like they're perfectly sealed tu begin with.

 

[DSG2003Mach1]

You can definitely fit it in there better than that, most of the wiring needs to lay along the bottom of the channel. I thought I had better pics on my phone but don't. I'll try to remember to take some tonight

 

[03 Cobra DSG]

Thanks for the replies I finally got it in there the passenger side was ruff.


Sent from my iPhone using svtperformance.com

 

[DSG2003Mach1]

And after pulling mine most of it runs across the top, not the bottom. My covers sit down as well as stock

Sent from my iPhone using Tapatalk