My Vortech'ed SVT Contour

csvtjohnga

Member
Established Member
Joined
Jan 24, 2006
Messages
264
Location
Macon, GA
got the vortech installed finally with the updated jackshaft along with the 3.12" pulley... Basicaly stock motor...exhaust, cleaned UIM/LIM, optimized TB. still working out a few kinks but runs strong and drives great. also installed is a eurospec transaxle with Torsen Diff and Sachs Super Clutch
NOTE- the video quality is extremely poor, sorry.
th_svtcontour421.jpg

th_svtcontour422.jpg

svtcontour429.jpg

svtcontour427.jpg

svtcontour430.jpg

S7300231.jpg
 
Last edited:

Blk91stang

Well-Known Member
Established Member
Premium Member
Joined
Dec 14, 2004
Messages
569
Location
Montgomery County PA
ohh man hot air setup how much boost 5psi?

Not to get off topic but you think you need an intercooler above 5psi? I'll run my 10psi and you run your 5psi on identical cars w/o intercoolers and see who wins... ;-)

Nothing wrong with a hot air setup as long as you reduce the timing to compensate for the heated inlet air. I do agree an intercooler at my 10 psi and increased timing would net some gains but it runs plenty fast for right now.


BTW- Awesome Contour!!!
 

csvtjohnga

Member
Established Member
Joined
Jan 24, 2006
Messages
264
Location
Macon, GA
mounted to the tranny...intake pipe leads rightinto the top. ill post a install pic for better view of it.

built tranny so hopefully it dont blow
 

guinnkyle

I love my Contour
Established Member
Joined
Dec 31, 2007
Messages
23
Location
Puyallup, WA
do you have any numbers on the hp? I'm thinking of trying to do something like this to mine. I have a stock csvt and want more power. I would like to see something around 250.
 

Users who are viewing this thread



Top