Need advice on build for 04 Cobra!

04Cobra23

Twin Screwed
Established Member
Joined
Oct 14, 2006
Messages
1,012
Location
Delray Beach, Florida
What’s up guys. I’d like to get started on a build on my 04 Cobra. I am wanting to get the car to around 750/800whp ish. Id like some opinions on a build or suggestions to get this done and be safe. I am thinking either Whipple or VMP for the blower. Few have said I would have to replace tranny with Magnum or a faceplated t56 and some have said it should be fine if I’m not digging or beating on it, etc. I don't daily the car and don’t beat the crap out of it. Mainly do some roll racing with friends here and there. Lots of different opinions but would like to hear from the forum.
 

roy_1031

roy1031
Established Member
Joined
Apr 20, 2011
Messages
4,796
Location
Rancho Cucamonga, CA
Fore return fuel system
2.9 or 2.65 blower
Crusher intake for either blower
Set of 1-7/8ths long tube headers
An upgraded 26 spline clutch like an rxt or DYAD to hold the power and some drag radials to put it to the asphalt. With the proper tuning you’ll be well above 700 rwhp and run deep 10’s if you wanted to have some fun.



Sent from my iPhone using Tapatalk Pro
 

03' White Snake

Well-Known Member
Established Member
Joined
Feb 5, 2007
Messages
3,790
Location
Mass
Raise the CR, E-85 and lots of boost. Any large blower mnf will get you there. It's all personal preference.
 

Users who are viewing this thread



Top