In stock and now shipping ONLY at Lethal Performance is the Zone 5 Performance Products MDM Mega Driver Module. http://www.lethalperformance.com/pages-productinfo/product-17795/z5-mdmmodule-zone-5-performance-mdm-mega-driver-module.html Will work on any 96-08 Mustang!! The MDM module was designed to give customers the ability to run multiple fuel pumps efficiently without having to build wire harness's or purchase multiple OEM FPDM modules. For the 99-04 Mustangs the only way to run dual or triple modules is by fabricating wire harness kits tying several modules together. This is not only costly but time consuming as well. For the 05+ cars it's even more difficult to do as there's no way to purchase the Ford Racing Dual FPDM harness or it's components seperately. So for GT customers that want to upgrade from a single module to a dual module system they'd have to purchase the entire Ford Racing GT500 fuel system. Another thing we had in mind when working with Zone 5 Performance on the MDM was to give the customer the ability to add on to their existing fuel system. The MDM does exactly that. This piece will actually allow you to add a pump or several pumps for that matter and provide them with the proper voltage in addition to allowing them to efficiently draw the proper amount of amps from your system without overloading anything. The MDM is used in all of our Triple Pump Fuel Systems as we feel it's the most efficient route to go for a system as capable as that. The MDM comes complete with all the necessary wiring for 1-3 fuel pumps and detailed installation instructions. If you have any questions regarding the MDM please feel free to give us a call. Here's some technical information about the MDM: - DRIVES UP TO *THREE* FORD GT PUMPS TO MAXIMUM FUEL CAPACITY - DESIGNED TO INTERFACE PERFECTLY WITH THE FORE PRECISION TRIPLE PUMP FUEL HAT! - CAN SUPPLY IN EXCESS OF 35A OF CURRENT WITH LESS THAN 0.5V TOTAL INTERNAL VOLTAGE DROP (as a comparison, the stock FPDM will drop approximately 2.0V at ~ 20A of forward current) - OPERATES AT TWICE THE OUTPUT FREQUENCY OF THE STOCK FPDM FOR SMOOTHER PUMP CURRENT CONTROL RESULTING IN POTENTIALLY LONGER PUMP LIFE AND BETTER FUEL PRESSURE REGULATION - BUILT-IN WIRING UPGRADE AND HIGH CURRENT RELAY - 8AWG INPUT WIRING FOR BATTERY CONNECTION - 14AWG OUTPUT WIRING FOR EACH PUMP - BEAUTIFULLY CNC MACHINED HOUSING/HEATSINK BY YOUR BILLET EXPERTS "FORE PRECISION WORKS"