Nitto NT05R 305/35/19's on stock rims

[try03venom]

id start with 18psi track and 32 street

 

[5.0_MD]

Looks great and I'm glad to see that a set of spacers helps with the crazy high offset on these cars. Would you mind snapping a better picture of the fronts? Planning on getting a set of spacers when I install my ProKit to help with the offset. Can't stand that sunken-in wheel look on lowered cars. :bored:

 

[BV600]

These ones? http://www.maximummotorsports.com/14-thick-wheel-spacers-5-Lug-pair-1979-2014-Mustang-P574.aspx

 

[Jagger227]

Did you install longer studs? if so was it a complete PITA?

 

[ArabianOak]

These ones? http://www.maximummotorsports.com/14-thick-wheel-spacers-5-Lug-pair-1979-2014-Mustang-P574.aspx

Did you install longer studs? if so was it a complete PITA?

I believe so...ordered mine from LMR...link is below...

http://www.latemodelrestoration.com/item/MM-MMWS2/1994-04-Mustang-1-4-Wheel-Spacers

No longer studs req'd. You need a minimum of 4 full turns on the stock studs for it to be deemed safe and with these installed it went nearly 8 full turns. Went to the track on my Nittos yesterday and no wheels flew off the back...lol...so I think they are good to go!

 

[francisco511]

Ya I want to see some rear quarter panel/tire shots to see how much the spacers fill the horizontal gap between the tires and the quarter panel. I was thinking about adding 1/4" spacers as well. I just found a replica of our PP wheels in 19x10 and was going to buy a set of those and put DR's on them w/ the spacers, and keep the Perelli's on the stock 9.5 wheels.

I'm looking for some replicas in 18x10 or 10.5. Where'd you find the ones you saw

 

[RSKtakR]

http://www.oewheelsllc.com/s.nl/sc.16/category.875920/ctype.SS/SS.875920/.f#.VSx7SIY8KnM

Don't have gloss black tho, just matte and satin.

 

[francisco511]

Oh I see. Cool thanks.

I might copy op set up

 

[Antonio Acosta]

Just got these installed on my stock PP rims and they look great! They hook incredible as well! Really makes the car feel much more planted in a straight line...Some of you were asking so here are some pics...

By the way, my car is lowered on Steeda 1 inch lowering springs and I have 1/4 inch maximum motorsports spacers on all 4 sides...

Just got these installed on my stock PP rims and they look great! They hook incredible as well! Really makes the car feel much more planted in a straight line...Some of you were asking so here are some pics...

By the way, my car is lowered on Steeda 1 inch lowering springs and I have 1/4 inch maximum motorsports spacers on all 4 sides...

is it just my phone but I can’t see the pictures