• Welcome to SVTPerformance!

Oil pump

Discussion in 'Cobra R's' started by theboss281, Oct 30, 2018.

  1. theboss281

    theboss281 Member Established Member

    Messages:
    276
    Joined:
    Sep 12, 2012
    Location:
    Doral - Florida
    I am setting up the engine for a recreation of a 2000 COBRA R and the main use will be the track, I have seen that several members of this forum really enjoy their 2000 Rs in their natural habitat, the track, to them who have modified their engines for get more power and better performance, can you tell me what oil pump you have installed in your engines ?

    Thanks in advance
     
  2. svtguy

    svtguy Active Member Established Member

    Messages:
    684
    Joined:
    Mar 24, 2001
    Location:
    Iowa
    My original 00R engine had a standard 2V oil pump and pick up tube in it. I replaced them with a 13/14 GT500 oil pump with Billet gears and an 03/04 cobra pick up tube.


    Paul
     
  3. '00project

    '00project Mystic '96 Established Member

    Messages:
    20
    Joined:
    Jul 11, 2015
    Location:
    Hampton, VA
    I used M-6600-F46 on my build.
     
  4. jrgoffin

    jrgoffin Been around... Established Member

    Messages:
    3,423
    Joined:
    Aug 1, 2002
    Location:
    The Midwest
  5. theboss281

    theboss281 Member Established Member

    Messages:
    276
    Joined:
    Sep 12, 2012
    Location:
    Doral - Florida
    Can you tell us what modifications you did to your 5.4 engine ?
     
  6. '00project

    '00project Mystic '96 Established Member

    Messages:
    20
    Joined:
    Jul 11, 2015
    Location:
    Hampton, VA
    NVH block .020 over. Offset ground crank, eagle rods for an ls, custom dimond pistons for around 11.7:1 compression, GT heads with pac springs and crower 62822-4 cams, cobra r intake. I just finished getting the car together and working on tuning.
     
    Last edited: Nov 7, 2018
    me32 and theboss281 like this.
  7. TFStang

    TFStang Well-Known Member Established Member

    Messages:
    1,389
    Joined:
    May 13, 2008
    Location:
    Boston
    That sounds awesome. Keep us posted on the numbers.
     
    me32 likes this.
  8. theboss281

    theboss281 Member Established Member

    Messages:
    276
    Joined:
    Sep 12, 2012
    Location:
    Doral - Florida
    Do you have news ?
     
  9. '00project

    '00project Mystic '96 Established Member

    Messages:
    20
    Joined:
    Jul 11, 2015
    Location:
    Hampton, VA
    Not good news. I started a post asking about cam tower movement. After the engine gets to temp there is a squealing like a belt. No belt slip, cooling pressure holds, need to double check if glitter is in the oil (first time had no glitter), and would like to take oil pressure reading from the heads. The down side is I no longer have time to test any of this. I'm military and moving over seas, the car was suppose to go with us. It will be going to the father-in-laws until I can revisit in three-ish years.
     
    DAVESVT2000 likes this.
  10. specracer

    specracer SVTOA MCA Premium Member

    Messages:
    828
    Joined:
    Sep 27, 2009
    Location:
    MA
    Thank you for your service!

     
    DAVESVT2000 likes this.
  11. '00project

    '00project Mystic '96 Established Member

    Messages:
    20
    Joined:
    Jul 11, 2015
    Location:
    Hampton, VA
    You're welcome!
     

Share This Page