Oil separators

mpierson7af

Member
Established Member
Joined
Mar 11, 2012
Messages
73
Location
Whiteman AFB, MO
So I've been looking for an oil separator and all the research points to using either L&S or DMR but I think both of those brands are gone. I can't seem to find either one.
I would like to ha e one that drains right back in.

Is there a way to make one like that?
 

captrad

New Member
Established Member
Joined
Jan 20, 2014
Messages
11
Location
Idaho
Many believe that it's not the best thing to reroute contaminate loaded oil back into your crankcase. If emptying the oil separator canister is difficult to reach or fills up to frequently, consider putting a drain hose on the drain spigot and route it down the passenger side fender well behind the wheel. I have a 1/4 turn valve on mine so that I can drain it frequently without even opening the hood. I use a separator called the "Ultimate oil catch can" made by "42draftdesigns".
 

Coosawjack

Well-Known Member
Established Member
Joined
Mar 28, 2017
Messages
1,767
Location
Beaufort, SC
^^^What he said!!^^^

You will be putting a lot of water back in the oil if you do a "catch can return" so just empty it and keep going!!:)
 

Users who are viewing this thread



Top