• Welcome to SVTPerformance!

P/S Cooler upgrade?

Discussion in 'Fox-Body Cobras' started by Liv4Spd, Aug 19, 2008.

  1. Liv4Spd

    Liv4Spd New Member Established Member

    Messages:
    544
    Joined:
    Jun 26, 2003
    Location:
    CA
    I wanted to get your guys opinion on this. As some of you may or may not have read in a previous post, I'm replacing a few pieces of my front end after being riddled with some rather large debris on the highway a month or so back.

    This being the case, one of the pieces that I've decided to go ahead and replace is the P/S cooler. Here is the question...

    Is it worth it to go through the trouble of upgrading the unit to the 1993 Cobra R cooler/after-market unit; and if so does anyone have any leads or ideas as to where I might find one. Also, any instillation issues I should be aware of beforehand might be useful as well.

    Thanks in advance, as always you all have proven to be an invaluable resource.

    Rahmi
     
  2. bat-stang

    bat-stang The REAL Dark Knight Established Member

    Messages:
    800
    Joined:
    Feb 12, 2006
    Location:
    H- Town, TX
    Bump for a good question. I've upgraded from the stock 'cooler' on a previous GT by using an automatic cars' radiator and using the trans cooler lines for my power steering pump. I don't know where to source the Cobra R parts outside of maybe MPS in Georgia.
     
  3. Liv4Spd

    Liv4Spd New Member Established Member

    Messages:
    544
    Joined:
    Jun 26, 2003
    Location:
    CA
    Bump~
     

Share This Page