P1 Mach1 vs 2 Shelby GT500s

SuperMach1

Member
Established Member
Joined
Mar 7, 2008
Messages
350
Location
San Antonio, TX.
Dusted! Nice kills.

What are the details on the cars?
I don't really know too much about the Shelbys I did race the red one a while back when it was stock. Now I believe it has drag radials and exhaust, I know the guy I'll ask him more about his setup. The camera car Shelby I don't really know much about I had just met him that night
 

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,683
Location
El Paso, TX
WTH how'd you pull that off with 415rwhp? I mean a wins a win so bravo but have you changed something?
 

ZYBORG

Let's roll..
Established Member
Premium Member
Joined
Feb 22, 2006
Messages
21,016
Location
TX/S.FL
Lol... 415 whp aint gonna pull a modded Trinnity. Id say, he is likely in the 650 neighborhood.

OP, so whats your details / set up? Have you raced any other cars?
 

SuperMach1

Member
Established Member
Joined
Mar 7, 2008
Messages
350
Location
San Antonio, TX.
415 was my old setup stock block, 8 PSI, 93 octane. Now the car has a built motor, 11.3 compression ratio, 12 - 13 PSI on a P1, 98 Cobra intake cams degreed at 114, built 4r70 with a triple-disc 3800 stall, 410 gears and e85. car dynoed 601 and 530 torque on a Dynojet with an auto transmission
 
Last edited:

ZYBORG

Let's roll..
Established Member
Premium Member
Joined
Feb 22, 2006
Messages
21,016
Location
TX/S.FL
Car definitely moves well. Machs are nice.

Any other races OP?
 

SuperMach1

Member
Established Member
Joined
Mar 7, 2008
Messages
350
Location
San Antonio, TX.
Car definitely moves well. Machs are nice.

Any other races OP?

Yes I do visit Mexico frequently lol. I've raced a few 600 hp CTSV's, couple of cammed Vettes with a 150 shot, a 2017 ZL1 Camaro. I'll post the videos on this thread.

Good setup and runs strong. Imagine you are 200-300lbs lighter than GT500s as well?

Yes I believe I'm a couple hundred pounds lighter than the Shelbys
 

ZYBORG

Let's roll..
Established Member
Premium Member
Joined
Feb 22, 2006
Messages
21,016
Location
TX/S.FL
Good setup and runs strong. Imagine you are 200-300lbs lighter than GT500s as well?

More like around 600-500lbs.

His mach is probably in the 3,3XX lbs range and Shelbys are likely in the 3,9XX range.

Yes I do visit Mexico frequently lol. I've raced a few 600 hp CTSV's, couple of cammed Vettes with a 150 shot, a 2017 ZL1 Camaro. I'll post the videos on this thread.



Yes I believe I'm a couple hundred pounds lighter than the Shelbys

Nice man. Cant wait!
 

Users who are viewing this thread



Top