Parts you wish you bought when you could

BlksvtCobra01

Deplorable and Proud
Established Member
Joined
Apr 10, 2008
Messages
13,554
Location
Ohio
Alan at SOS is no longer doing 99-04 pillars? I sent him one in 2018. I went to a junkyard and sent him a good one so I could put my factory one up in storage. He did a amazing job. Only did them a few times a year. You had to send him a pillar they couldn’t get them new anymore and his customer service is top notch.

So you guys can’t send him one certain times of the year and have him do it?


Sent from my iPhone using Tapatalk
 

Saleen498

Well-Known Member
Established Member
Joined
Oct 21, 2017
Messages
1,183
Location
Commieweath of MA
Alan at SOS is no longer doing 99-04 pillars? I sent him one in 2018. I went to a junkyard and sent him a good one so I could put my factory one up in storage. He did a amazing job. Only did them a few times a year. You had to send him a pillar they couldn’t get them new anymore and his customer service is top notch.

So you guys can’t send him one certain times of the year and have him do it?


Sent from my iPhone using Tapatalk
Unfortunately that is no longer an option. He did the one in my saleen and I love it. I had 2 more boxed up ready to go to him but just ever got around to it, one for the cobra and one for a potential future mach 1. I emailed him this morning and he said it wouldnt be possible to continue making them without running thousands so it's just not happening.
20170220_081205.jpeg


and Jeffrey Epstein didn't kill himself.
 

HuntFishCobra

Well-Known Member
Established Member
Premium Member
Joined
Oct 29, 2011
Messages
1,314
Location
KS
The sos thing is my biggest one. I really don’t want to do any other gauge setup. If they made a decent cluster pod that didn’t have the screw holes or indentation for sn95 models that would be a decent backup. I absolutely refuse to buy any of the other pillar pods out there.
 

BlksvtCobra01

Deplorable and Proud
Established Member
Joined
Apr 10, 2008
Messages
13,554
Location
Ohio
Unfortunately that is no longer an option. He did the one in my saleen and I love it. I had 2 more boxed up ready to go to him but just ever got around to it, one for the cobra and one for a potential future mach 1. I emailed him this morning and he said it wouldnt be possible to continue making them without running thousands so it's just not happening. View attachment 1632917

and Jeffrey Epstein didn't kill himself.

Damn that’s a shame.


Sent from my iPhone using Tapatalk
 

SID297

OWNER/ADMIN
Administrator
Joined
Mar 27, 2003
Messages
55,703
Location
Myrtle Beach, SC
Remember the Autometer Lunar gauges for the '03-'04 Cobra? Back in the day they were a popular choice, and then a few years later they were discontinued. They perfectly matched the factory gauge color at night. I had a 3-gauge A-pillar pod setup on my '03 Cobra. Always loved how they looked.
View attachment 1632883

I still have some of those new in the Box, FR500 steering wheel too.
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,349
Location
Cheshire, CT
Ah, here's one you might remember. The Billetflow throttlebody. It was only made for a couple of years. Excellent quality with no sticking plates. Speaking of Doug and Billetflow, remember his Hall of Shame on his website. Customers who didn't pay their bills would get their names added it.

u1JGPfVHoGAJzEORp--_P1OAKDbqRQW29weVxn_hkfmOgeli0APdZwRZkQo5DDx-nDPcPr99Zz87d5d87XaiakwdRJ8EgaQj.jpg
 

SID297

OWNER/ADMIN
Administrator
Joined
Mar 27, 2003
Messages
55,703
Location
Myrtle Beach, SC
Ah, here's one you might remember. The Billetflow throttlebody. It was only made for a couple of years. Excellent quality with no sticking plates. Speaking of Doug and Billetflow, remember his Hall of Shame on his website. Customers who didn't pay their bills would get their names added it.

View attachment 1632939

Have one of those too. I'd like to find a Magnum Powers pulley bridge for my L.
 

Green99

Active Member
Established Member
Joined
Sep 26, 2003
Messages
164
Location
Hattiesburg MS
13-14 featured a small screen that displayed all kinds of cool data as well as well as controlling track apps. It also displayed a Cobra logo on startup (mustang in the 13s, but could be flashed to show a cobra). Also, showed a top speed of 220 mph. My 2011 only goes to 160. :(

I know where one is.
 

Logan@Lethal

Authorized Vendor
Authorized Vendor
Joined
Oct 30, 2017
Messages
142
Location
Tampa, Florida, United States
13-14 instrument cluster for a swap into my 2011 GT500. Had it and the ABS module purchased from a member here.

Then a GTR went and wrecked me at the track. Sold it to fund the repair.

They appear to be rare as the Dickins now on the used market. Is what it is.
I've had and kept onto my 2014 GT500 cluster for awhile now. Sitting in bubble wrap if you wanted to make an offer on it. I cannot remember the mileage.. you'd have to get it reset either way.
 

Blown 89

Well-Known Member
Established Member
Joined
Jul 30, 2006
Messages
8,699
Location
AZ
Why couldn't youse guys get the dude with the 3d printer to build some SOS pod knock offs for youse?
This. They would be easy to make without a 3D printer too. I made an entire console from scratch before 3D printing was ever an option. The car is long gone but I still have that entire assembly sitting around. With the advancement in cheap 3D printing a pair of gauge pods would be relatively easy to make.
eDoZ7rN1.jpeg
hX2P34Qp.jpeg
 

1996slowbra

Well-Known Member
Established Member
Joined
Jun 6, 2011
Messages
907
Location
Deutschland
This. They would be easy to make without a 3D printer too. I made an entire console from scratch before 3D printing was ever an option. The car is long gone but I still have that entire assembly sitting around. With the advancement in cheap 3D printing a pair of gauge pods would be relatively easy to make.
View attachment 1632954 View attachment 1632955

Is that thing running windows XP?
 

Blkkbgt

Well-Known Member
Established Member
Premium Member
Joined
Feb 3, 2011
Messages
3,077
Location
The land of commies and socialists!
This. They would be easy to make without a 3D printer too. I made an entire console from scratch before 3D printing was ever an option. The car is long gone but I still have that entire assembly sitting around. With the advancement in cheap 3D printing a pair of gauge pods would be relatively easy to make.
View attachment 1632954 View attachment 1632955

Show us the way sir!
 

Users who are viewing this thread



Top