Quest for 10's

Zemedici

Well-Known Member
Established Member
Joined
Jan 7, 2013
Messages
21,223
Location
Atlanta, GA
Mods? Car details?

Your 60’ is good sounds like you need more power - how much speed did you gain back half?
 

FL Skydiver

Member
Established Member
Joined
Sep 19, 2017
Messages
61
Trap speed was 124 mph

2012 Roush Stage 3- 79mm pulley, VMP 67mm TB, 56 pound injectors, JLT CAI, VMP BAP, 2 hours on the VMP dyno, Stock MT82, clutch and driveshaft, 3.31 gears. 11.29 @ 124mph on 28x11.5 MT bias R's.
 

Zemedici

Well-Known Member
Established Member
Joined
Jan 7, 2013
Messages
21,223
Location
Atlanta, GA
I know that you already posted that

What was your speed at the 1/8?

What are the mods on the car?
 

FL Skydiver

Member
Established Member
Joined
Sep 19, 2017
Messages
61
1/8 was 7.32 @ 98.80 stock Roush suspension. The only thing I changed was the gears.
 

FL Skydiver

Member
Established Member
Joined
Sep 19, 2017
Messages
61
24129713_10215212541172727_4924739075087242618_n.jpg
 

gimmie11s

I Race Pontiacs
Established Member
Premium Member
Joined
Jun 1, 2004
Messages
18,491
Location
la la land
Were you on a drag slick? That's a great 60' time.

Couple more mph and you have 10s.
 

bunits19714

Active Member
Established Member
Joined
Mar 27, 2015
Messages
500
Location
monroe mi
you should be running 10's(10.5-10.6) with your set up no problem- I don't know how much seat time you have but the numbers show your car is producing around 5-520 rwhp, your time slip numbers are in line from start to finish, this meaning there is nothing out of the ordinary from the 60 foot to the end of the 1/4- with better shifting and launch you will get there but the time slip reads like a na coyote with weight reduction not a fi car. Did you data log any of your runs to send to your tuner? Good luck on your quest you will make it.
 

gimmie11s

I Race Pontiacs
Established Member
Premium Member
Joined
Jun 1, 2004
Messages
18,491
Location
la la land
Looks like the 1-2 shift is real slow or?

Car should mph way better than 98 in the 1/8 with that 60'.

How is your shifting?
 

FL Skydiver

Member
Established Member
Joined
Sep 19, 2017
Messages
61
you should be running 10's(10.5-10.6) with your set up no problem- I don't know how much seat time you have but the numbers show your car is producing around 5-520 rwhp, your time slip numbers are in line from start to finish, this meaning there is nothing out of the ordinary from the 60 foot to the end of the 1/4- with better shifting and launch you will get there but the time slip reads like a na coyote with weight reduction not a fi car. Did you data log any of your runs to send to your tuner? Good luck on your quest you will make it.

According to the dyno its making 622 at the tire. I also have a Race Star drag pack on it now, I dynoed it with the heavy as hell 20" factory wheels.

 

FL Skydiver

Member
Established Member
Joined
Sep 19, 2017
Messages
61
I did datalog some and sent it to my tuner. He said my IAT are rarely below 140 degrees. He suggested I buy the VMP heat exchanger which is about $800.

I was thinking I might like to do the Killer Chiller instead for not too much more and would lower the IAT a lot more. Anyone have any experience with the Killer Chiller? I was thinking that might be good especally since it is a Florida car.

https://killerchiller.com/products/2010-2014-s197-mustang-kit
 

FL Skydiver

Member
Established Member
Joined
Sep 19, 2017
Messages
61
Sooo close to my goal of running in the 10’s. I ran an 11.09 missed 4th gear and trapped at only 120 mph. The previous run was 11.26 at 126 mph smoking the tires off the line.
25348266_10215365215229483_7937201785674886070_n (2).jpg
 

Users who are viewing this thread



Top