Radium catch cans

03 DSG Snake

Unknown Cyborg
Established Member
Joined
Nov 3, 2002
Messages
20,962
Location
CA
These guys make some sweet looking catch can setups for various cars, unfortunately this mounting solution will not work with the older GT500s that have that AC canister in the corner. Is this something that might fit anywhere else, likely with some custom plumbing?

http://www.radiumauto.com/Dual-Catch-Can-Kit-Shelby-GT500-P1229.aspx

I did email them about the issue but they didn’t have an older car to test fit at the time.
 

RedVenom48

Let's go Brandon!
Established Member
Premium Member
Beer Money Bros.
Joined
Sep 29, 2014
Messages
7,973
Location
Arizona
You need it for the passenger PCV more. Id run the stock drivers PCV hose. I literally have caught drops of oil in almost 2 and a half years with a JLT drivers catch can. Drivers side is only under ported vacuum.

Passenger side is manifold vacuum and were a majority of the oil vapor will be brought into the supercharger. I just installed and am very happy with my UPR GT500 catch can. only like $160 bucks as well. 4 stage filtering of oil vapor as well!

http://www.uprproducts.com/mustang-billet-plug-n-play-catch-can-separator-shelby-07-sc.html

Im sure the Radium can could be modified for use on the passenger side where its most needed.
 

1 Alibi 2

Veteran,...retired Navy !
Established Member
SVTP OG 4 Life
Joined
Aug 27, 2011
Messages
4,743
Location
Hackettstown, N.J.
..........Jegs unit spliced into the factory line on the 2011.
1st_A_P_2014_cruise_night_-_05-07-2014_003.jpg

..........Jegs unit spliced into the factory line on the 2014.
30_day_build_update_pics_05-21-2014_009.jpg

........................$ 50.00.
 

03 DSG Snake

Unknown Cyborg
Established Member
Joined
Nov 3, 2002
Messages
20,962
Location
CA
You need it for the passenger PCV more. Id run the stock drivers PCV hose. I literally have caught drops of oil in almost 2 and a half years with a JLT drivers catch can. Drivers side is only under ported vacuum.

Passenger side is manifold vacuum and were a majority of the oil vapor will be brought into the supercharger. I just installed and am very happy with my UPR GT500 catch can. only like $160 bucks as well. 4 stage filtering of oil vapor as well!

http://www.uprproducts.com/mustang-billet-plug-n-play-catch-can-separator-shelby-07-sc.html

Im sure the Radium can could be modified for use on the passenger side where its most needed.

I've been using the Bob's separator for some time. I do like the matching can setup on the Radium setup, even if the driver side isn't really necessary.
 

Users who are viewing this thread



Top