Radium catch cans

[03 DSG Snake]

These guys make some sweet looking catch can setups for various cars, unfortunately this mounting solution will not work with the older GT500s that have that AC canister in the corner. Is this something that might fit anywhere else, likely with some custom plumbing?

http://www.radiumauto.com/Dual-Catch-Can-Kit-Shelby-GT500-P1229.aspx

I did email them about the issue but they didn’t have an older car to test fit at the time.

 

[me32]

That for sure wont work for us 07-09 gt500s

 

[RedVenom48]

You need it for the passenger PCV more. Id run the stock drivers PCV hose. I literally have caught drops of oil in almost 2 and a half years with a JLT drivers catch can. Drivers side is only under ported vacuum.

Passenger side is manifold vacuum and were a majority of the oil vapor will be brought into the supercharger. I just installed and am very happy with my UPR GT500 catch can. only like $160 bucks as well. 4 stage filtering of oil vapor as well!

http://www.uprproducts.com/mustang-billet-plug-n-play-catch-can-separator-shelby-07-sc.html

Im sure the Radium can could be modified for use on the passenger side where its most needed.

 

[jenkins_1120]

I looks to me that its routed for both sides. I'm looking at different catch can options now and piecing it together. something like this is where I am going to start I have most of the AN fittings and hoses already. Ill post some pics up when I get it finished.

https://www.amazon.com/gp/product/B076LXP3JG/ref=ox_sc_sfl_title_3?ie=UTF8&psc=1&smid=A26XZY1DGLFZZH

 

[1 Alibi 2]

..........Jegs unit spliced into the factory line on the 2011.

..........Jegs unit spliced into the factory line on the 2014.

........................$ 50.00.

 

[03 DSG Snake]

You need it for the passenger PCV more. Id run the stock drivers PCV hose. I literally have caught drops of oil in almost 2 and a half years with a JLT drivers catch can. Drivers side is only under ported vacuum.

Passenger side is manifold vacuum and were a majority of the oil vapor will be brought into the supercharger. I just installed and am very happy with my UPR GT500 catch can. only like $160 bucks as well. 4 stage filtering of oil vapor as well!

http://www.uprproducts.com/mustang-billet-plug-n-play-catch-can-separator-shelby-07-sc.html

Im sure the Radium can could be modified for use on the passenger side where its most needed.

I've been using the Bob's separator for some time. I do like the matching can setup on the Radium setup, even if the driver side isn't really necessary.