Rear Bumper cover rattles

Jefe

Well-Known Member
Established Member
Joined
Mar 24, 2006
Messages
18,443
Location
AZ
Does your bumper have the wave problem near the trunk lid? Is it bubbled up a little bit in the middle right above the R in COBRA? Try pushing down on the top under the trunk lid and see if that stops it

Kind of sounds like one of the mounting screws is lose
 

nextime

Termi? Read Signature
Established Member
Joined
Jun 26, 2012
Messages
993
Location
Brookfield, WI
No wave issues.

Is it easy to remove the entire cover to fix the issue?

I just hear it driving with the top down once in a while and I dont like that ghetto ride sound.
 

Jefe

Well-Known Member
Established Member
Joined
Mar 24, 2006
Messages
18,443
Location
AZ
I dont even think you'll need to remove it. Just get under there and check them. There are 2 screws behind the tires in the fender wells on each side. Those would be the easiest to check first. Underneath there are pin style retainers. One of those could be broken. One on the left, one on the right and three just in front of the gas tank:

1_zpsd74a5c81.jpg


If its not those check these:

11_zpsbf670e0b.jpg
 

Users who are viewing this thread



Top