I purchased a set of aftermarket wheels and the rear center cap wont fit. Can you grind down the part of the hub that doesnt have threads to fix the clearance issue?
Last edited:
Rear center cap wont fit?
- Thread starter BlownShelby10
- Start date
How much are you talking? 1/16”, 1/8” or like 1/2”?
Why not. Make sure you have a nut on before grinding so you can fix the burr it will leave on the threads.
Why not. Make sure you have a nut on before grinding so you can fix the burr it will leave on the threads.
Its like not even a 1/2 inch from fitting the center cap on... Ill leave the nut on there. N. Also thought about just a half inch spacer and extended studs as well. Just dont want to run a spacer if i dont have to.
admin please delete thanks
Users who are viewing this thread
