Replacing stock TOB retainer…have a ?

RTCOBRA2964

Active Member
Established Member
Joined
Oct 20, 2010
Messages
1,093
Location
SoCal
Looking to replace the stock TOB retainer with a LP piece. The T-56 already had the input shaft replaced with a 26-spline D&D piece. Will I need to check for proper end play on the input shaft? Or will I just need to R&R the retainer? What do you use to seal the transmission case?

I've done a search but most replaced the input shaft along with the retainer, not the retainer alone.
 

Bigggy

Member
Established Member
Joined
Feb 25, 2013
Messages
648
Location
Québec/Canada
I did the same but keepîng the OEM input shaft. I think that not changing the shaft itself wont change the end play cause it uses hard shims, so as long you keep the same shims in the same place you should be fine.

I resealed mine with some good black RTV.
 

Users who are viewing this thread



Top