Im sure it can, but whats needed to do so?
Sent from my SM-G892A using the svtperformance.com mobile app
Sent from my SM-G892A using the svtperformance.com mobile app
School me; can a terminator hang with a hellcat?
- Thread starter jmsa540
- Start date
stock for stock, no.
street stuff will be easier, as traction is an issue for both cars....so, bigger blower (vmp 2.65, 2.9 whipple maybe?) with supporting fuel mods (e85 helps a LOT), some rear suspension improvements, and sticky tires. or junk the blower and IRS to go turbo (twin?) and SRA.
on a prepped track, prolly a 3.4 whipple, supporting mods, and axles. race fuel would be nice. turbos would also work with more boost.
street stuff will be easier, as traction is an issue for both cars....so, bigger blower (vmp 2.65, 2.9 whipple maybe?) with supporting fuel mods (e85 helps a LOT), some rear suspension improvements, and sticky tires. or junk the blower and IRS to go turbo (twin?) and SRA.
on a prepped track, prolly a 3.4 whipple, supporting mods, and axles. race fuel would be nice. turbos would also work with more boost.
I remember seeing a video of one around 600whp beat one on the street.
Lots of variables of course
Sent from my iPhone using svtperformance.com
Lots of variables of course
Sent from my iPhone using svtperformance.com
i've passed vettes in my transit connect on the street.
not sure the other guy knew we were racing, tho...
not sure the other guy knew we were racing, tho...
Yup I remember seeing this too.
Sent from my Moto E (4) Plus using the svtperformance.com mobile app
A hellcat has a good what, 700 pounds on a cobra. any upgraded power adder would be sufficient. 600rwhp or over would do the trick.
Hellcat runs 10.8 @ 131mph stock.
Match that and you could pull them on the street all day.
Match that and you could pull them on the street all day.
I ran my 03 with the 2.3 whipple against my buddy's exhaust / tune 6 speed car and it was a drivers race fwiw
No
Malcolm's Cobra will.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
lol
Me back when i was at 600rwhp. He was stock, ended up with a car and a half on him if I recall.
Last edited:
If you just want to hang with them and not beat them then I'm sure it can be done with a maxed out stock blower on E85, a good tire, and a good driver. My stock motor Vortech auto Mach that makes 508rwhp and is a 10.90 car hangs with stock Hellcats.
Only ran 2 of them but to me depends on race.
But seeing them a lot at the track, I would feel better from a dig. They have a lot of weight to move out of the hole.
If it's an auto Hellcat from a roll, they are deceivingly faster imo...I was making 644 on 2.2 KB - was neck and neck through 3rd and part of 4th.
I would feel confident if you are 130 mph+ in a 6 speed car.
But seeing them a lot at the track, I would feel better from a dig. They have a lot of weight to move out of the hole.
If it's an auto Hellcat from a roll, they are deceivingly faster imo...I was making 644 on 2.2 KB - was neck and neck through 3rd and part of 4th.
I would feel confident if you are 130 mph+ in a 6 speed car.
This! Key word...MONEY. If you've got enough of it, you can put together a package that could slap a Hellcat.
I instantly remembered this recent thread about @badcobra's 1346whp Terminator.
https://svtperformance.com/threads/1346whp-from-an-03-cobra.1173784/#post-16182178
Users who are viewing this thread
