Size Injectors & Pump for 1200rwhp (E85)

[Digital]

I'm trying to size a system for 1200rwhp on e85. I've looked around a bit and used this calculator.

It would seem that the Bosch 105lb HI injectors & a MagnaFuel ProTuner Series - 2,000+ HP fuel pump would supply the fuel needed for that power level.
Is this correct or would you recommend another combination?
Also would -8an lines work in both directions for this or would -10s be required?
I currently have a Magnafuel 2000hp regulator as well. I'm just going to assume that'll work fine as well?

 

[95YellowGTBeast]

I would get at the very least 120lb injectors....but in my opinion I would get 160's or bigger.

 

[Entrenched]

My goals are similar to yours, I went with Bosch 205s and am going to end up with 3 DW300s or 2 Walbro 465s.

 

[bmorecobra]

I would go with ID2000s if it were my car. Have heard nothing but good things about them. There was a thread on modfords by Eric brooks critiquing them a while back, if I can dig it up later I will post. However what he had to say about them was exceptional.

 

[Carbd86GT]

That calculator would be correct for gasoline, but for E85, you will need to size everything a little bigger to be safe. Like stated, the Bosch 205's we have as well as a couple of the up coming Walbro 465's will do the trick (we should have these by the mid-end of the month).