• Welcome to SVTPerformance!

Some new upgrades to my Boss

Discussion in '2012-2013 Boss 302 Mustang' started by 2013Boss302, Sep 10, 2015.

  1. 2013Boss302

    2013Boss302 New Member Established Member

    Messages:
    626
    Joined:
    May 12, 2010
    Location:
    redondo beach ca
    Hello Everyone,

    its been a while since I have been on any forums.

    Recently I installed some upgrades on my 2013 Boss.

    Mcleod Extreme Street Clutch rated to 700HP/700TRQ and Mcleods steel flywheel

    http://www.mcleodracing.com/index.php/clutch-kits/street-extreme/street-extreme-pns-41240.html

    20150803_104633_zpsb3maabdw.jpg

    20150803_141820_zpsfwcth6rk.jpg

    MGW race spec Ver. 2

    https://www.mgwshifters.com/shifters/mustangs/79

    20150803_124818_zpstuwoicis.jpg

    Maximum Motorsports Tubular K Member, Bump Steer kit, transmission scoop, Extreme duty Lower Control arms, Lower control arm relocation brackets.

    20150815_120701_zpsyrizy8hc.jpg

    20150815_124748_zpsmarx8f2n.jpg

    20150815_124736_zpssehyxykr.jpg

    FB_IMG_1439667955089_zpsxxmtgrlx.jpg

    I also installed some Trueforged 18 x 10 Chicane 3 pc wheels and had them custom powder coated by my friend Robbie.

    they are wrapped in 295/30/18 Toyo Tires R888

    IMG_20150908_171424_zpsctotvaja.jpg

    IMG_20150909_161636_zpsptuzafzq.jpg

    20150908_183957_zpsqseti5kc.jpg

    The Clutch and Shifter eliminated the shifting problems 100% I would highly recommend these mods to anyone. THEY ARE A MUST.

    The suspension Mods are amazing. the car feels so much more stable on hard turns. the corrected geometry feels amazing
     
    Last edited: Sep 10, 2015
  2. tek302

    tek302 Member Established Member

    Messages:
    180
    Joined:
    Dec 21, 2014
    Location:
    Rowlett, TX
    No UCA just lowers right?
     
  3. Mach828

    Mach828 Active Member Established Member

    Messages:
    1,417
    Joined:
    Mar 21, 2010
    Location:
    Albuquerque
    Love the car! Looks like a track warrior.
     
  4. 2013Boss302

    2013Boss302 New Member Established Member

    Messages:
    626
    Joined:
    May 12, 2010
    Location:
    redondo beach ca
    i did not touch the upper. i have been told the stock one is sufficient enough.
     
  5. gimmie11s

    gimmie11s Don’t be an idiot Established Member

    Messages:
    12,850
    Joined:
    Jun 1, 2004
    Location:
    so cal
    That tire isn't even 25" tall. Did you consider a larger rear tire?

    What are your impressions of the clutch?

    Car looks good.
     
  6. chao5.0

    chao5.0 Well-Known Member Established Member

    Messages:
    1,106
    Joined:
    Mar 5, 2012
    Location:
    Conroe, Tx
    how do you like that clutch? I was looking into them along with a Spec stage 2, if I go with McLeod I want to use their chromoly or aluminum flywheel.
     
  7. 2013Boss302

    2013Boss302 New Member Established Member

    Messages:
    626
    Joined:
    May 12, 2010
    Location:
    redondo beach ca
    I track the car so i wanted to go with something I can rotate. As for the Clutch it is amazing. it bites hard and it eliminated my issue where the clutch would not disengage at any RPM between 7000 and 8200 i highly recommend it.

    The Clutch is amazing. The shifter and the clutch are my 2 favorite mods so far because I can finally shift the car at 8200 RPMs. Before it was a nightmare and honestly i didnt feel comfortable shifting over 7k because the clutch would not disengage. I went with he steel flywheel because the lightweight flywheel would require a retune for the engine.
     
  8. 200MPHCOBRA

    200MPHCOBRA Liberty Tree Needs Water Established Member

    Messages:
    316
    Joined:
    May 8, 2005
    Location:
    Metairie, LA
    The clutch on these cars are junk from the factory. If anyone still has the stock Ford one, get rid of it before it ruins your transmission.
     

Share This Page