Strut/Bushing Question
- Thread starter ETH
- Start date
What caster/camber plates are you using?
Stock
Ok. None of those bushings look familiar, but I haven't messed with stock plates in a very long time.
Your first picture is what the stock ones look like. The second picture is similar to what comes with the Cobra Maximum Motorsports Caster Camber plates with dust boots.
You will need the upper mount (3rd picture) like you are saying with stock CC plates. If not, it will be a hot dog in a hallway and not allow you to mount the strut to stock camber plate.
If you are running aftermarket CC plates, then the 2nd pic is what you would want. You can run the shock covers from pic 2 with the stock mount in pic 3. Stretch them over the upper mount and zip tie in place.
You will need the upper mount (3rd picture) like you are saying with stock CC plates. If not, it will be a hot dog in a hallway and not allow you to mount the strut to stock camber plate.
If you are running aftermarket CC plates, then the 2nd pic is what you would want. You can run the shock covers from pic 2 with the stock mount in pic 3. Stretch them over the upper mount and zip tie in place.
Mustang Caster Camber Plates, 2003-2004 Cobra
www.maximummotorsports.com
Last edited:
Users who are viewing this thread
