New to me, 2017 Grabber Blue with 9K on the clock. Miles will average out over time as my Daily is a 2013 Taco and this is a fun / weekend car.View attachment 1498701
My wife bought me a Shelby GT350 for my Birthday. I had a 2005 Mustang GT that I built as a tribute to the GT350
before shelby even was thinking about one. it was what I thought the GT350 would look if it were on an S197
body.
My Grand Daughter said the color is the same color as Marvels's Deadpool. I looked at the cat and thought.. wow she's right.
Here is my 2017 Shelby GT350 (Deadpool) color scheme.
![]()
View attachment 1485769
View attachment 1485770
Here are some pictures of my Tribute Car.
View attachment 1485773 View attachment 1485774 View attachment 1485775 View attachment 1485772
Here with a little air under the front tire
it ran 12.2 in the 1/4 mile
View attachment 1485771
Thanks Marc! I got the wing from Steeda.....so it's called the "Steeda Race Wing". If I remember correctly it goes for around $430-$450 bucks. It comes with a template and you will have to drill two holes but still use the rear factory holes. The only problem is the when you remove the factory wing and install this one you will have three holes still left. Steeda sends you plugs to cover them or you can take it to a shop to get them covered with bondo and repaint the trunk which is the expensive way to do it. I just used the plugs and they really aren't noticeable unless you are looking for them. I just plugged mine and I'm fine with that. The factory wing has 6 bolts but it's taped on liked crazy. Had to use a copper fishing line and run it under it but it came off nice and easy. I don't like the stock wing plus everyone has that or the "R" wing so I wanted something different than norm. Take care!