• Welcome to SVTPerformance!

Sway bar and spring combinations

Discussion in 'SN-95 and New Edge Mustangs' started by notthenow, Dec 15, 2019.

  1. notthenow

    notthenow New Member

    Messages:
    7
    Joined:
    Nov 30, 2014
    Location:
    Tucson
    Hey I am wondering everyone's thoughts/experiences with sway bar and spring combinations. I have a 1998 GT. Several years ago I bought a package that include the Bullitt springs, sway bars, and shocks and struts. Nice improvement and inexpensive (around $500). I noticed the Bullitt bar was smaller, but tubular versus my GT bar which was solid but larger. I have found that the spring rates were 450 front and 210 rear for the GT and 600 front and 250 rear for the Bullitt. Anyhow, I picked up Steeda sport springs 650/250) on a good sale because I still thought the car could be a bit lower. Then I have been thinking I might add the Eibach or SR bars. The GT bars were 30mm/24mm, the Bullitt 28mm/21mm and the Eibach/SR are 35mm/25m. Have any of you done this and what did you think/feel about the combination?
    Thanks for any input.
     

Share This Page