THE DYNO RESULTS ARE IN ( for now )!! Our Whipple Supercharged 2024 Mustang GT!!

Jake@Lethal

Authorized Vendor
Authorized Vendor
Joined
Sep 14, 2020
Messages
3,764
Location
Wellington, FL
The dyno results are in on our Whipple Supercharged 2024 Mustang GT ....for now!
It's what you have all been waiting for (some more patiently than others...)!

We put our Whipple Supercharged Mustang GT on the dyno over at Palm Beach Dyno to see what numbers it would make... and it did NOT disappoint!

This is a 6-speed 2024 Mustang GT using the Whipple calibration on 93 octane. We installed a Stage 2 Whipple Supercharger kit with the Gen 6 3.0L supercharger and are using the 3.75" pulley, which is what comes standard in the kit. We also have a set of Kooks Longtube headers, a Corsa HH-pipe, an RXT clutch and a QA1 carbon fiber driveshaft.


We did run into an issue of hitting a limiter at 7100rpm which is set by Ford on all manual transmission 2024 Mustangs (including the Dark Horse) so we didn't get a full RPM run. This same issue happened with our stock baseline runs. We did do a full pull in 3rd gear, which did not hit a limiter, and it made 781rwhp! On average, the 4th gear numbers were about 20-30hp more than 3rd gear so we wonder if fixing the limiter will present us with an 800+rwhp number.

Remember this is on the stock Whipple calibration, stock 3.75" pulley and 93 octane!



2024mustangGT_dyno_whipple.jpg


But Whipple is working on a limiter fix! However the numbers so far are more than promising and you would not be hitting 7100rpm in 4th gear while going down the track in this setup.... which means it's time to hit the drag strip!

Click here to follow the build:
OUR LETHAL PERFORMANCE SUPERCHARGED 2024 MUSTANG GT BUILD

Stay tuned for Part 2 where we'll [hopefully] have a fix for the limiter issue AND we'll test out some smaller pulley sizes and a little ethanol to see what kind of gains we can squeak out of this setup.
#teamlethal #whippletheworld
 

SGT MERC

Well-Known Member
Established Member
Joined
Mar 25, 2012
Messages
786
Location
Shawnee, OK
That's bad ass. I currently have a Whipple 3.4 on my Marauder and I'm trying to save for the new Whipple 3.0. Fixed income makes it hard to save with this bs economy, but I will get there one day. Priorities of caring for my brother takes precedence.
I can't wait to see the results on part 2.

Sent from my SM-N975U1 using the svtperformance.com mobile app
 

Users who are viewing this thread



Top