• Welcome to SVTPerformance!

Throwout Bearing Issues

Discussion in 'Driveline' started by Patriot Guy, Jan 28, 2014.

  1. Patriot Guy

    Patriot Guy Member Established Member

    Messages:
    274
    Joined:
    Jan 12, 2007
    Location:
    Huntsvile
    Just had a whinning start in the Cobra and am almost positive it is the Throwout Bearing but want to make sure before I pull the tranny and change it. It whines like crazy with the clutch pushed in and gets relatively quiet with the clutch engaged. The issue that is throwing me is the pitch of the noise changes when I have the tranny in neutral and rev the engine. The whine increses and decreases along with the engine revolutions. Is this normal when a throwout bearing is going bad?
     
  2. TBCobra

    TBCobra Premium Member Premium Member Established Member Beer Money Bros.

    Messages:
    8,963
    Joined:
    Feb 15, 2008
    Location:
    Colorado
    My TB is making noise again. Mine squeaks with the clutch disengaged and goes away completely when it is engaged. I cant hear mine when I rev my car but it sounds like a TB to me.
     
  3. Patriot Guy

    Patriot Guy Member Established Member

    Messages:
    274
    Joined:
    Jan 12, 2007
    Location:
    Huntsvile
    I want to makes sure it is not the Pilot Bearing. Does anyone have any experience with the pilot bearing going out and what it's symptoms are?
     

Share This Page