True forged Victory wheels. 20x9.5 front and 20x10.5 rear. Really nice shape couple of really small nicks on the black powder coat. Has 275/35R20 pilot sports on the front and 305/35/20 mickey thompson et street on the rear. $3,250 for the setup. The rears have less then 500 miles on them and they were $800 by themselves. I have more pics to anyone who is interested.
FOR SALE: True forged Victory Wheels
- Thread starter Mccauleymt
- Start date
Do you have any pics of them on a car?
All my pics are to big, i can either text them to you or email them whatever you prefer
Hey I'm local and interested.
Feel free to call me on my cell 215-527-5182
Hey - Sorry, I missed that they were 20's. I'm looking for 18's. GLWS
PM you my cell phone # for pics.
Are you looking for GT500 wheels in 18? I'm considering selling some CCWs SP505s of my Terminator? I'm in the Springs.
Sh
ShitI was kind of interested in these. Are you saying they are good rare or no one wants this finish rare? Lmao
I’m the second owner of the set! They are badass wheels! Only reason I’m selling is i wanted to change it up and went all black forgeline wheels
lol. people just dont know that kind of finish option was available. some people think outside the box when doing their wheels lol. you can always change the finish on them yourself if you get bored of it.
those are the same wheels. unfortunately the name on that GHIG boss doesnt come up in my computer so he must have not been the original purchaser; so i cant pull the original build sheet.
they are 10.5 which you can run a 315 on. not sure on the offset though. they are probably flush to the fender which would make the 315 sidewall bulge poke out. doable if the car isnt too low. OP can easily measure the backspacing on the wheel and post up which well help his sale a lot.
to measure the backspacing:
lay the wheel face down on the ground.
you will be measuring as if there is no tire on the wheel, so you may need to subtract for the sidewall.
lay a straight edge across the back of the wheel.
measure straight down to the circular mounting pad.
the measurement should be either 7.5" or 7.75" --it is possible they were custom spec'd to something else, close to those numbers (but unlikely).
Attachments
all of a sudden it clicked in my memory which car i remembered seeing these on. from that, i was able to get the original purchasers name, and then pull the order.
the specs are as follows:
20x9 6.1" backspacing
20x10.5 7.6" backspacing (basically flush to fender)
here's the car they were originally on. guy named Ben
hope that helps with the sale!
the specs are as follows:
20x9 6.1" backspacing
20x10.5 7.6" backspacing (basically flush to fender)
here's the car they were originally on. guy named Ben
hope that helps with the sale!
Attachments
That's what I call service after the sale. Nice work.
Wow thank you so much! I honestly won’t be upset if they don’t sell! They look so good on the car!
I would be willing to ship these too if someone was to far away to pick them up.
No worries! Thanks I appreciate it!
Users who are viewing this thread
