• Welcome to SVTPerformance!

Vortech Install Air pump relocation bracket mounting

Discussion in 'SN95 Cobras' started by 97RioRed4V, Jul 1, 2014.

  1. 97RioRed4V

    97RioRed4V Member Established Member

    Messages:
    118
    Joined:
    Sep 17, 2012
    Location:
    Peoria, IL
    Tonight during my Vortech install, mounted the airpump to the relocation bracket. Then tried to install the bracket back into the car. Two of the three bolts were no problem. The third bolt seems impossible. Do I need to remove the inner fender to mount this third bolt?? Thanks!
     
  2. 1996MysticSnake

    1996MysticSnake Active Member Established Member

    Messages:
    936
    Joined:
    Jan 28, 2007
    Location:
    PA
    Remove the pump all together and have it shut off in the tune
     
  3. 97RioRed4V

    97RioRed4V Member Established Member

    Messages:
    118
    Joined:
    Sep 17, 2012
    Location:
    Peoria, IL
    What did you do with tube that comes out of the headers? Did you cap that off?? I cut that pipe off and hooked on the high temp hose. Mine actually rubs againt the vortech bracket which makes it a pain to install.
     
  4. LDC2335

    LDC2335 Active Member Established Member

    Messages:
    1,997
    Joined:
    Feb 26, 2009
    Location:
    USA
    I mounted mine without the bracket(cuz I didn't have one). I used the same procedure as the for the Jlt intake which just moves it over and utilizes only one of the stock bolts. So if my one bolt will hold, I'm sure your two will be even better.

    uploadfromtaptalk1404323840009.jpg
     
  5. 97RioRed4V

    97RioRed4V Member Established Member

    Messages:
    118
    Joined:
    Sep 17, 2012
    Location:
    Peoria, IL
    I was thinking of using only two bolts. To me three bolts seems overkill. I thought I might be missing something simple and then get it done.
     

Share This Page