I am helping a friend with an 03 Mach and he is putting an 03/04 cobra engine and trans in. He’s going to need to go return style to support the Whipple he wants to put on. He’s targeting 800 hp.
What all does he need?
What all does he need?
The Mach has the same dual pump hat and returnless setup?
If not, you’ll really just need the tank from a cobra. Kit comes with hat, pumps, hose, regulator and connections to hook to factory rails or aftermarket rails.
Go on lethal and see if the return system for 03-04 cobra covers the Mach. If so, just order a kit but I’d go fore.
Sent from my iPhone using svtperformance.com
No need in going return for that.
Will need rails as the cobras are maxed before 500rwhp.
Two 450 pumps and two regular fpdms.
Will need to run an 8an line.
/done
Given that he's doing a drivetrain swap I'd say he's pretty handy. I would suggest drawing out what he wants and figuring out the fittings. I've installed a couple of kits and always ended up needing an extra fitting or two. When we did my sons car we started from scratch and it worked out better.He’s got the cobra tank, cobra fuel hat and twin cobra pumps.
Was hoping for a link to a setup. Thanks.
Depending on the power he is wanting to make Fore offers a few different set ups. The level 1E system is rated 700+ and the level 2 is rated for 1200+.He’s got the cobra tank, cobra fuel hat and twin cobra pumps.
Was hoping for a link to a setup. Thanks.
Thats interesting. Ive replaced more than a few to resolve lean out issues below 500rwhp.
I'll be sure to look else where next time.