• Welcome to SVTPerformance!

wheelhop gone! Thank you Posi and Metco!

Discussion in 'SVT Shelby GT500' started by acobra03, Apr 17, 2011.

  1. acobra03

    acobra03 New Member Established Member

    Messages:
    515
    Joined:
    Mar 1, 2009
    Location:
    Buena NJ
    After several days of PM's between Brian at Posi and myself I decided to pull the trigger on Upper Control Arms with the HD bracket and the Lower Control Arms. Everything was made by Metco and made in America! My initial concerns NVH turned out to be for nothing! I'm truely impressed with the quality of these pieces and the performance I gained with them. I have no wheelhop whatsoever and alot more traction. I picked up zero vibration, zero harshness and a slight increase in rearend gear noise only on deceleration when downshifting. The increase in rearend gear noise is very slight and only noticeable if the radio is off and you're listening for it. I'm very happy with the results. If anyone is thinking about this upgrade, don't hestitate! Metco makes some quality stuff and Posi is excellent to deal with.
     
  2. zporta

    zporta KB INSIDE Established Member

    Messages:
    6,395
    Joined:
    Oct 12, 2009
    Location:
    Baltimore
    I have Metco upper and lower control arm products and I love them as well
     
  3. 09Troublemaker

    09Troublemaker " That don't sound stock" Established Member

    Messages:
    6,317
    Joined:
    Dec 9, 2008
    Location:
    Long Island, N.Y.
    I'm sure you won't miss that hop
     
  4. acobra03

    acobra03 New Member Established Member

    Messages:
    515
    Joined:
    Mar 1, 2009
    Location:
    Buena NJ
    Hell no, I keep waiting to lift expecting wheelhop but there is none. I have to relearn how to drive this thing. I can't wait to see what it will do at the track!
     
  5. ShakeNBake

    ShakeNBake New Member Established Member

    Messages:
    237
    Joined:
    Mar 27, 2011
    Location:
    Central NJ
    Nice..
     
  6. 2blown

    2blown New Member Established Member

    Messages:
    342
    Joined:
    Dec 23, 2010
    Location:
    El Paso
    very nice, I need some as well. Wheel hop is terrible on mine
     
  7. pony23

    pony23 Active Member Established Member

    Messages:
    1,169
    Joined:
    Aug 18, 2007
    Location:
    Ct
    Nice. Did you get race ends or poly?
     
  8. acobra03

    acobra03 New Member Established Member

    Messages:
    515
    Joined:
    Mar 1, 2009
    Location:
    Buena NJ
    It's a combination of delrium and poly. The poly is sandwiched between two plates of delrium on the lowers that connect to the rearend.
     

Share This Page